15kw Air Cooled Industrial Chiller for Plastic Industry
Posted on

Model NO.: HTI-6A
Certification: CE
Condition: New
Trademark: HERO-TECH
Transport Package: Export Standard Package
Specification: CE
Origin: Shenzhen China
HS Code: 8418692090

HERO-TECH air cooled industrial chiller
Model:HTI-6A, 
Capacity:15kw


Product introduction
HTI-A/W series industrial chiller is mainly applied in Plastic & Rubber industry; It can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency. They are also widely used in Metal working, Mechanical & Engineering, Chemical & Pharmaceutical, Food & Beverage, Laser, Electronics industry, Textile, Electroplate, Semi-conductor testing, Water jet, Vacuum coating, Construction and Military,

Design features:
Danfoss or Copeland brand compressors
high efficiency condenser and evaporator
Chilled water temperature range 5º C to 35º C.
R22 or R407c.
Adequate sized evaporator and condenser ensure the chiller unit running under 45C high ambient temperature.
Microcomputer control system offering accurate temperature stability within ± 1º C.
Low noise and big volume fan motor.
Large volume centrifugal pump
Multi-protection devices ensure the chiller unit running safely.
Copper coil in tank evaporator,  avoid using of extra water tank. Shell and tube or plate type evaporator available on request.
15kw Air Cooled Industrial Chiller for Plastic Industry



HTI-A Series Air Cooled Industrial Chiller Technical Specifications
Model HTI-6A
Nominal Cooling Capacity Kcal/h 13244
KW 15.4
Max Power Consumption KW 5.81
Power Source   3PH 380V/50HZ
Refrigerant Type   R22
Control   Thermal expansion valve
Compressor Type   Hermetic Scroll
Power KW 4.7
Condenser Type   finned copper tube + low noise outer rotor fan
Fan Motor KW 0.18×2
Air Volume m3/h 6000
Evaporator Type   Copper Coil Built in SS Tank
Coolant Flow m3/h 2.6
Tank Volume Litre 90
Inlet and Outlet Connection(BSP) Inch 1
Pump Power KW 0.75
Head m 20
Unit Protection Modules Compressor Overheating, Motor Overload, High&Low Pressure, Chilled Water Over Temperature, Tank Water Level
Dimension Length mm 1420
Width mm 680
Height mm 1425
Weight KG 265
 
NOTE: The specifications based on the following design conditions:
  • Chilled water supply/return temperature: 7ºC/12ºC
  • Cooling air inlet/outlet temperature: 30ºC/38ºC
 
We reserve the right to modify the specifications without further notice.
 
 
 
 

Screw Filter Press

Shenzhen Hongfa Environmental Protection Equipment CO., LTD , https://www.hongfafilterpress.com