The common faults in the nutrient powder production line mainly include loss of control of the electric valve, uneven distribution of the material, and rotation of the electric valve motor while the valve is not rotating. The specific conditions and treatment methods of the nutrient powder production line above are:

Electric valve out of control. When this happens, check for any foreign matter stuck in the valve body. If it is found, remove it immediately. The material level detection device is not in the proper position. It needs to be repositioned properly. The sensor switch on the electric valve is damaged or improperly positioned. Replace the new sensor switch or adjust the mounting position. The material is not uniform. The exclusion method for this situation is to correct the levelness of the two ends of the forming roller, whether there is a gap between the squeegee and the forming roller, and if necessary, the upper fastening bolt needs to be adjusted. The electric valve motor rotates and the valve does not rotate: In this case, replace the new coupling or tighten the coupling fixing bolts.

The nutrient powder production line should be operated in strict accordance with the correct operation method during the use process, and the production workers who use the nutrient powder production line should be trained to use scientific operations to minimize the failure of the nutritional powder production line during use.

3.0 Ton Spider Crane

3.0 Ton Spider Crane

specifications 2.98t Maximum working radius 8.8m×0.25t Maximum elevation on the ground 9.2mX 1t Maximum underground elevation 10mX1t (4 rope) 20mX1t (2 rope) 40mX0.74t (1 rope) Roll up device Lift hook up speed 0-8m / min (4 rope) Steel wire rope specifications Φ10mm×50m retractor device Hanging arm form 5-section boom, pentagonal structure Hanging arm length / time 3.1m-9.2m/20sec Up and down device Arm angle / time 0-78

Hubei Ruiyate Automobile co.,ltd., located in the famous ancient "bells" music of the township, the capital of special vehicles -- draws in hubei province. Suizhou is located in the north of hubei province, the Yangtze river and the huaihe river interchange, east ChengWuHan, xiangyang, xinyang in the north west, south of jingzhou, the throat "" surf, the conjugate JingYu han. Suizhou is "north ordos town", "north gate" opening to the outside world, hubei province, is the national implementation of the western development strategy important relay station and transfer station from east to west.

This company mainly produces and sales overhead working truck series, the series of modern municipal engineering, pavement maintenance work series, the series of RV. The products sell well both at home and abroad, and the market prospect is very broad, at the same time cater to the development trend of special vehicles in our country.

3.0 Ton Spider Crane,Spider Crane Truck,3Ton Spider Crane Truck,5 Section Spider Crane Truck

Hubei ruiyate Automobile Co.,Ltd , https://www.ruiyate-automobile.com