People's Daily, Sanya Channel, April 14th With the gradual improvement of people's living standards, more and more passengers travel by air. However, there are always smart travelers who ignore their laws and regulations and openly fight with airport security to create a “tricks”.

On April 9th, a smart traveler actually disassembled an ordinary lighter into five pieces for smoking. He was hidden in his body and carry-on baggage, and was eventually taken to Sanya Phoenix International Airport (hereinafter referred to as “Phoenix Airport”). Attentive security inspectors seized it.

According to the inspector Ice Ice, the passenger passed through the metal detector door wearing a pair of booties, and did not see any abnormalities on the surface until the Ice Detector detected the upper of her shoe. The passenger's right upper ankle, with a distinctly protruding body, can be seen at a glance only by looking at the surface of the boot.

“At that time, I inserted my hand into her boots and immediately touched the object. When I took it out and saw it, it turned out to be a shell of a lighter.” Ice Bing said: “There are 5 or 6 passengers with her. Their The baggage has not yet been checked by the X-ray machine , so we do not know where the rest of the lighter is located," Ice Bing said. However, the truth soon fell apart and the inspector attentively discovered that the X-ray image of one of the bags showed something suspected of a lighter's ignition. He immediately alerted himself and informed the colleague of a strict inspection of the bag. After some searching, the five parts of the split shell and electronic firearms finally got together. Afterwards, the security inspector Bing Bing could not help feeling that there was a cigarette lighter in the smoking section of the airport separation area. It was so difficult to understand that it was so costly.

Prior to this, Phoenix Airport also seized a "lighter-type" electric shocker. On the evening of April 3, the security personnel of the Phoenix Airport conducted an X-ray examination of a passenger’s carry-on baggage and found suspicious items in the baggage. At first, security personnel thought it was a lighter. After careful inspection, it was discovered that the lighter also had hidden "mystery". Actually it was an electric shocker. As long as the trigger switch could release a large voltage, there was a safety hazard. The security personnel will immediately control the passengers and even bring the people's possessions to the airport public security authorities for examination and handling.

The friendship of the Phoenix Airport reminded passengers that according to the relevant provisions of the civil aviation flight, items such as lighters and electric shockers are prohibited from being carried around by passengers or checked in as checked baggage. Passengers are requested to properly handle such items before boarding the plane. There should be no luck. If similar items are found during the security inspection, the serious cases will be handed over to the airport public security authorities for further review and cancellation of their eligibility for boarding.

Pro, would like to learn more about security inspection, would like to learn more about security tips? Immediately pay attention to the gold mining Internet cafes. We are an individual witness management platform. We understand security, we have, you can rest assured!

   

Belt Pulley

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Belt Pulley,Wind Impeller,Washing Machine Pulley,Washing Machine Motor Pulley

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.nbsunlee.com