Drive shaft is to transmit motor rotary dynamic force onto the bit, meanwhile to withstand axial and radial load from drilling weight. We have the following two types of drive shafts:
1) Bit nozzle pressure loss is 7.0Mpa, Using hard alloy radial bearing and Drive Shaft Assembly with thrust bearings.
2)Bit nozzle pressure loss is 14.0 Mps, using hard alloy radial bearing and PDC cutter flat thrust bearing. It has longer lasting life and higher bearing capacity.
Drive Shafts Assembly and Parts Drive Shafts Assembly And Parts,Drive Shaft Assembly,Drive Shafts Parts,Hydraulic Drive Motors Weifang Shengde Petroleum Machinery Manufacturing Co., Ltd. , http://www.sdpetromachine.com
Rubber Tensile Testing Equipment can test various materials (both finished and semi-finished products ) of tensile strength, compressive strength and elongation, can do stripping, tear strength, flexural, compression test and etc. It can connect up to the computer and display or printout the test times, test value, max. Value, etc. Also it can make various report forms according to the requirements.
This series of Tensile Tester is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force , etc with different fixtures according to national and international standards customer required.
This machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.
Main Technical Parameter
Items
Specification
Sensor
Celtron load cell
Capacity
5, 10, 20, 25, 50, 100, 200kg
Unit Switchover
G, KG, N, LB
Display Device
LCD or PC
Resolution
1/250,000
Accuracy
±0.5%
Max. Stroke
1000mm (including fixture)
Test Speed
0.1-500mm/min (adjustable )
Motor
Panasonic Servo Motor
Screw
High Precise Ball Screw
Elongation Accuracy
0.001mm
Power
1ø, AC220V, 50HZ
Weight
Approx.75kg
Accessories
One set tensile clamp, one set Lenovo computer, one piece English software CD, one piece operation video CD, one piece English user manual
 
Product Features
1. Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan)
2. Control system: a, computer control with TM2101 software; b, Back to origin automatically after the test, c, store data automatically or by manual operation
3. Data transmission: RS232
4. Displacement resolution: 0.001mm
5. Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain.
6. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.
7. User can set parameters of product material such as length, width, thickness, radius, area and so on.
8. Many languages random switching: Simplified Chinese, Traditional Chinese, and English.
                 Automatic Metal Material Tensile Strength Test Machine
Rubber Tensile Testing Equipment can test various materials (both finished and semi-finished products ) of tensile strength, compressive strength and elongation, can do stripping, tear strength, flexural, compression test and etc. It can connect up to the computer and display or printout the test times, test value, max. Value, etc. Also it can make various report forms according to the requirements.
This series of Tensile Tester is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force , etc with different fixtures according to national and international standards customer required.
This machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.
Main Technical Parameter
Items
Specification
Sensor
Celtron load cell
Capacity
5, 10, 20, 25, 50, 100, 200kg
Unit Switchover
G, KG, N, LB
Display Device
LCD or PC
Resolution
1/250,000
Accuracy
±0.5%
Max. Stroke
1000mm (including fixture)
Test Speed
0.1-500mm/min (adjustable )
Motor
Panasonic Servo Motor
Screw
High Precise Ball Screw
Elongation Accuracy
0.001mm
Power
1ø, AC220V, 50HZ
Weight
Approx.75kg
Accessories
One set tensile clamp, one set Lenovo computer, one piece English software CD, one piece operation video CD, one piece English user manual
Â
Product Features
1. Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan)
2. Control system: a, computer control with TM2101 software; b, Back to origin automatically after the test, c, store data automatically or by manual operation
3. Data transmission: RS232
4. Displacement resolution: 0.001mm
5. Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain.
6. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.
7. User can set parameters of product material such as length, width, thickness, radius, area and so on.
8. Many languages random switching: Simplified Chinese, Traditional Chinese, and English.
Automatic Metal Material Tensile Strength Test Machine
Model NO.: HD-B609B-S
Control: Computer Control
Weight: 0-100Kg
Power Source: AC220V
Test Speed: 0.1-500mm/Min(Convertible)
Motor: Panasonic Servo Motor
Panasonic Servo Motor: 0.001mm
Stroke: 1000mm
Sensor: Celtron Load Cell
Operate and Display: Computer
Load Resolution: 1/250, 000
Screw: High Precise Ball Screw
Power: One Phase, AC 220V
Load Cell: Celtron Sensor
Trademark: HaiDa
Transport Package: Strong Wooden Case
Specification: Atsm
Origin: Guangdong China
HS Code: 9024109000
Model NO.: HD-B609B-S
Control: Computer Control
Weight: 0-100Kg
Power Source: AC220V
Test Speed: 0.1-500mm/Min(Convertible)
Motor: Panasonic Servo Motor
Panasonic Servo Motor: 0.001mm
Stroke: 1000mm
Sensor: Celtron Load Cell
Operate and Display: Computer
Load Resolution: 1/250, 000
Screw: High Precise Ball Screw
Power: One Phase, AC 220V
Load Cell: Celtron Sensor
Trademark: HaiDa
Transport Package: Strong Wooden Case
Specification: Atsm
Origin: Guangdong China
HS Code: 9024109000
                 Automatic Metal Material Tensile Strength Test Machine