Automatic Panel Steel Mesh Wire Welding Machine
Posted on

Model NO.: DP-DNW-3
Voltage: 3phase, 220V/380V/415V/440V
Motor: 2.2kw;4kw
Welding Speed: Max80rows/Min
Weight: 2.0t, 2.5t, 3.0t, 3.5t
Capacity: 60kVA*4/5/6/7
Certifications: CE
Material: Galvanized Iron Wire
Hole Shape: Square
Mesh Size: 3/4 Inch
Surface Treatment: Galvanized
Weave Technique: Plain Weave
Application: Filter, Sieving Mesh, Protecting Mesh, Decorative Mesh, Cages, Construction Wire Mesh
Color: Silver
Type: Welded Mesh
Trademark: JIAKE
Specification: CE CCC
Origin: Heibei, Anping, China
HS Code: 8515809090
Automatic panel steel mesh wire welding machine

Raw material: 
Low-carbon wire,black wire,galvanized wire,stainless wire.

Machine advantages 
1. Safe and easy to operate
2. Inverter with adjustable frequency;
3. Energy saving 30%;
4. High speed and high productivity;
3. low noise;
4. low cost.

Machine Characteristics  
1. Both longitude wire and cross wire was feeding from wire coils automatically.
2. The raw material is applicable for low-carbon steel wire or galvanized wire.
3. The mesh size is precise and the machine can be set the width of length according to customers'                requirement.
4. Thorn shaft pulls the mesh. Cross wire space depends on the thorn shaft .So we can produce the thorn      shaft as you need.

Technical Parameter

Model		 DP-DNW Motor 4.0KW
Wire Diameter 0.65mm-1.8mm; 1mm-2.2mm Welded Transformer capacity 60kva*7
Aperture/pitch 12.7mm-101.6mm;   25.4mm-101.6mm
Mesh width 2000mm Weight 2.0T,2.5T,3.0T,3.5T
Welding speed Max 120rows/min Measurement of machine 2.9m*1.3m*1.4m

Auxiliary Equipment
Mesh Repairing Machine, Mesh Repairing Table, 
Wire Rolling Machine, Bobbin stand-off.   
 
Control System
The control system adopts synchronous control technique. The welding time and separate welding are controlled by computer with PLC program touch screen system and HMI.
Mesh Sending Part
The mesh sending system is controlled by computer.Cross wire feeds from the wire coil sending from the servo motor. Longitude wire feeds from coil automatically.
Welding Electrode
There are 16 pieces of electrodes that are special-designed and are made of column copper. They show little wear rate and can be used on multiple sides.
Transformer
This machine equips 4-7pieces of typical and efficient transformer, which has 8 grades, enlarging the welding wire diameter range. Every two welding electrodes need a water cooling transformer.
Power Voltage
The machine welds wire by supporting temporary current, so it requires electricity. We can design the machine according to the power voltage in your country.

Usage of the electric mesh 

Welded wire mesh wall insulation, also known as barbed wire, galvanized wire, galvanized welded wire mesh, steel wire mesh, welded mesh row, touch welding network, network construction, exterior security Wimbledon, decorative wire mesh, barbed wire, square wire mesh, screen, crack network.
Stainless steel welded wire mesh is made of high quality stainless steel welded wire row, more acid, alkali, welding firm, beautiful, versatile features.

Factory show 
      Hebei Jiake Welding Equipment Co., Ltd. founded in 2000, located at the junction of Beijing, Tianjin and Shijiazhuang, Anping County, which is famous as "Hometown of wire mesh" in China, is a professional manufacturer for wire mesh machineries. The company has been developing smoothly and quickly and it has more than 100 employees. And the company has own wire mesh machineries and several pilot plants with strong technical force and advanced production and checkout equipments.

Global service 
We have sold to five continents, more than 50 countries and areas.
Asia:Korea,Philippines,Vietnam,Malaysia,Pakistan,SriLanka,Kazakhstan,
UzbekistanIran, Iran, Saudi Arabia
Europe: Russia, Moldova,Poland,Serbia,Macedonia,Monaco,Spain,Portugal
Africa:Egypt,Tunisia,Algeria,Morocco,Ethiopia,Kenya,Tanzania,Senegal,
Gambia,Zambia,Angola,Zimbabwe,
Oceania: New Zealand,Papua New Guinea
America:Salvador Mexico,Trinidad and Tobago,Colombia,Venezuela,
Ecuador, Peru, Bolivia, Brazil Chile, Argentina

Guarantee And After-sale service
1.Guarantee time: one year since machine was at buyer's factory but within 18 months against B/L date.
2.Within guarantee time, if any components are broken under normal condition, we can change for free.
3.We can send our best technician to buyer's factory for installation, debugging and training.
4.Complete installation instructions, circuit diagram, manual operations and machine layout.
5.24 hours technical support by e-mail.
6.OEM production

Contact me
Hebei Jiake Welding Equipment Co.,Ltd
Address:Wire Mesh Insdustrial Zone, Anping County, Hebei Province, China
Sales: Jenny Yang 
Mobile: +86 13739793519 
If you need the machine, Just contact me anytime !
I will give you the best quotation!

Welcome to our factory!!!

The multifunction busbar processing maching is the patented product developed by our company.Comparing with the traditional Busbar Processing Machine, this product has the following advantages and features:

   The punching and shearing units adopt round integral structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;

   The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;

   This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous working of three stations without mutual interference;

   The machine is provided with an automatic oil charge and discharge system, easy to operate, with the hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system from contamination;

   This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive deterioration, and extend the service life of hydraulic oil and the seals; PLC control that is stable and reliable.

   Swappable dies offering extreme convenience;

   PLC control that is stable and reliable.

Hydraulic Busbar Cutting Punching Bending Machine

Hydraulic Punching Machine,Hydraulic Busbar Cutting Punching Bending Machine,Cnc Busbar Punch Machine,Cnc Busbar Shear Machine

JINAN EURO-ASIA INT'L CO., LTD , https://www.eaelectricmachine.com