Automatic Low-e Coating Remover Machine Automatic Low-e coating remover machine is one insulating glass machine to remove or delete the low-e coating film.It can delete normal square and shape glass, thickness with 3-19mm.Machine can run via both direction.Machine controlled by PANASONIC PLC.Machine can contact with insulating glass production line directly,after remove the Low-E film,glass transfer to the insulating glass production line. Automatic Glass Coating Remover Machine,Vertical Glass Coating Remover Machine,High Speed Glass Manual Film Removal Machine,Automatic Glass Film Removal Machine JINAN WEILI MACHINE CO LTD , https://www.wlglassmachine.com
Check valve installation should pay attention to the top
Check valve installation should pay attention to the top 1, do not make the check valve in the pipeline to bear the weight of large check valve should be independent support, so that the system from the impact of pressure. 2, when installing, pay attention to the direction of the flow of the medium should be consistent with the arrow direction of the body ticket. 3, vertical drop-check valve should be installed in the vertical pipe. 4, lift-level flap check valve should be installed on the level of the pipeline. This article Keywords: check valve