2, in strict accordance with the process requirements, timely parking, complete the production tasks for the month on time;

3. It is strictly forbidden to operate after drinking, and it is strictly forbidden to drive fatigue;

4. Strictly implement the equipment maintenance system and operation system, carefully check the working conditions of all parts of the equipment, and continuously improve the equipment integrity rate;

5. Familiar with the specifications, performance, construction, maintenance and operation methods of the equipment, and achieve “three good” and “four meetings”, and strive to improve the technical status of the equipment and the level of operation technology;

6. Establish the idea of ​​“safety first”, implement the safety management system of the plant selection, the post safety duties and the safety operation procedures and action standards of the production posts, and eliminate personal and equipment accidents;

7. Obey labor discipline and post discipline. To assist the squad leader and other personnel in the production of various unexpected problems, do not talk about the price of temporary work, do not push or drag, quality and quantity;

8. Carefully fill in the operation and maintenance records of the equipment, so that the records are complete, clear, and the data is true, and the equipment, pipelines and regional sanitation of the post are well done;

9, do anti-theft work, forklifts, forklifts locked in time;

10. Cleaning, maintenance and maintenance of vehicles;

11. Vehicles must not be handed over to others for driving.

Epoxy Adhesive

(1) solidifying rapidly within 3-5 minutes,
(2) suitable for small parts and structural strength
(3) can be used after one hour
(4) quick set and high adhesive performance
(5) can be lacquered and waxed
(6) waterproof and chemical medium
(7) joint layer is clear and elastic

Main Component:
A component is the modified Epoxy Resin, B component is modified Sulfur hardener

Scope Of Application:
The products of this series are widely used for bonding of metal and non-metals, connecting, sealing and repairing of hard materials, construction, automobile components, electronic components, also for usage in the material of pearls, jade, arts and crafts, antique etc.

Using Method:
1.The surface should be clean and dry, without oil or wax
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly,
3.Press it according to the actual condition.. it could achieve the using intensity after the solidifying for one hour during the normal temperature, it is suggested to operate at above 5℃.

Warning:
1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess to much.
2.Tighten the caps after usage .Do not mix the cap of part A and B.
3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5.Take strict precautions against touching by the kids and entering into the mouth.

Storage And Packing:
1.Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2.Preserve and transport as non dangerous products.

Epoxy Adhesive,Epoxy Resin,Epoxy Stick,502 Adhesive

Hunan Magpow Adhesive Group co.,ltd , https://www.magicglue.net