Di-tertiary Butyl Peroxide is an organic compound consisting of a peroxide group bonded to two tert-butyl groups. It is one of the most stable organic peroxides, due to the tert-butyl groups being bulky. It is a colorless liquid.
DTBP can in principle be used in engines where oxyge is limited, since the molecule supplies both the oxidizer and the fuel
DTBP is an irritant to noses, and eyes and skin. It is also flammable, so it should be handled with care.
DTBP is a liquid dialkyl peroxide. It is an efficient initiator for polymerization of olefins and
acrylic resins, and a modification agent of PP degradation, insoluble in water, soluble in
organic solvents such as toluene, acetone, styrene, etc. Freeing point lower than -30℃.
Di-Tertiary Butyl Peroxide,Dtbp Di-Tertiary Butyl Peroxide,Chemical Di-Tertiary Butyl Peroxide,Di Tertiary Butyl Peroxide Jiangxi Zhewei Material Technology Co.,Ltd , https://www.jxzwchem.com
Cylindrical Teflon sealing plug valve sealing principle
Cylindrical PTFE sealing plug valve, the valve body is equipped with a PTFE sleeve and the valve sleeve, which is pressed with a compression nut in the valve seat, the seal is sealed by the valve plug And Teflon sleeve asked a certain amount of interference to achieve, that is, the valve plug PTFE sleeve squeeze to achieve the seal. Therefore, the requirements of the valve plug and PTFE sleeve surface roughness value must be small, the geometric error must be small, in order to achieve the required pressure seal. If the seat sleeve needs to be compacted again in order to restore the sleeve seal, it must be yellow at the valve closing position to prevent the Teflon sleeve from being forced into the runner. Search Keyword: More Valve Technical Articles Valve Products Supply Information