Packing and shipping Q: What is our policy of the payment term? -Any order valued less than USD10,000 has to be 100% prepaid. -Irrevocable L/C at sight is acceptable for most of business. -Irrevocable L/C with less than 60-day term will be only acceptable for some -Any L/C with more than 60-day term will not be acceptable. -D/P at sight will be acceptable for some business after negotiation, while other -D/A and O/A will not be acceptable basically. -Partial payment is negotiable, but normally we require the advanced payment -Normally the lead time is calculated from the date of receiving the L/C or advanced -Some rush orders might be fulfilled within 30 days or even shorter time, until we -Any order with less than USD2,000 will be only acceptable after negotiation. -Sample order is exception. -As for the minimum quantity for each product, please contact with us for further information.
Intergrated Design Batch Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Integrated Design Batch Waste Plastic Pyrolysis Plant Intergrated Design Batch Waste Plastic Pyrolysis Plant,Waste Plastic Pyrolysis Plant,Rubber Pyrolysis Recycling Plant Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclingthewaste.com
Water is removed by the centrifugal force which is produced from semi closed-type
impeller.The semi closed impeller allows big particles as large as 25mm to pass through.
Floating switch controls the pump to start on/off to realize the automatic work at a site.
Applications
Â
Key features
Ceramic shaft, non-corrosive, is suitable for fresh and sea water.
All the live parts are sealed into the chamber with good water proof and high insulation.
Permanent magnet and high efficiency synchronous motor with a overcurrent & overheat protector inside and the knock-down rotor impeller structure is safe, reliable and easy to maintenance.Â
This design of combined structure is easy for disassemble and cleaning.
Â
Parameter
Â
Technical Data
Â
Â
Â
Â
Â
Â
Â
Â
Â
Model
SPA-350B
SPA-750B
SPA-1000B
SPA-1500B
SPA-2000B
SPA-3000B
SPA-4000B
SPA-5000B
SPA-6000B
Mains
230V/115V-50/60HZ
230V/115V-50/60HZ
230V/115V-50/60HZ
230V/115V-50/60HZ
230V/115V-50/60HZ
230V/115V-50/60HZ
230V/115V-50/60HZ
230V/115V-50/60HZ
230V/115V-50/60HZ
Power
6W
12W
16Â W
25W
43W
68W
75W
85W
105W
Flow max
350Â l/h
750Â l/h
1000Â l/h
1500l/h
2000l/h
3000l/h
4000l/h
5000l/h
6000l/h
Head max
0.8m
1.5m
1.8m
2.5m
3m
3.5m
3.0m
4.5m
5.2m
Outlet
13mm
13mm
15mm
1/2"
1/2"
1/2"
1/2"
1"
1"
CableÂ
2m
2m
2m
2m
2m
2m
2m
2m
2m
Water temperature
35ºC
35ºC
35ºC
35ºC
35ºC
35ºC
35ºC
35ºC
35ºC
Protection rating
IPX8
IPX8
IPX8
IPX8
IPX8
-
-
-
-
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Logistic Date
Â
Â
Â
Â
Â
Â
Â
Â
Â
Package
12pcs/ctn
12pcs/ctn
6pcs/ctn
6pcs/ctn
4pcs/ctn
4pcs/ctn
4pcs/ctn
4pcs/ctn
4pcs/ctn
Net/Gross Weight
11kg
12.5kg
13kg
20.7kg
20kg
22.6kg
22kg
22.6kg
23kg
Loading Qty
3000pcs
3000pcs
2795pcs
2795pcs
1745pcs
1745pcs
1745pcs
1745pcs
1098pcs
(20GP/40GP/40HQ)
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
The MEDAS Group is a developing leading industrial in China in the two business
areas of pump and garden care and consumer goods. The MEDAS Group's products
and services are designed to improve the quality of life by providing solutions that
are both innovative and beneficial.
Since being founded in 1997, MEDAS has rapidly emerged as a company spanning
the entire domestic market. MEDAS has always oriented itself towards fostering
talent and technology-based production, guiding our success with customer support
and trust. Almost all our office staff have a bachelor degree or above and vast operational experience, helping to efficiently provide design and experimental operation as well.
The principle of "Quality comes first" is deeply embedded in the heart of every Medaser,
a principle which MEDAS also reflects on the large scale.
Our service
We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and logistics. Our professionalism guides us through the development
and production process.
Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.
Â
FAQ
A: -100% advanced payment is the first option we prefer to taking.
business after negotiation.
terms will not be acceptable.
no less than 30%, and the balance to be paid before shipment
Q: How long will be the lead time for the orders to us?
A: -Normally the lead time for our orders is 45-60 days, depending on the order
quantity and our production schedule.
payment as agreed in contract.
finally approve.
Q: Do we have minimum order requirement?
A: -Yes, the minimum order value has to be USD2,000.
Â
Easy Disassemble and Cleaning Fountain DC Pond Pump
Model NO.: SPA-4000B
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Submersible Pump
Industry: Home and Garden
Media: Clean Water
Performance: Automatic Pump
Theory: Centrifugal Pump
Voltage: 220V
Phase: Single
Scope of Application: Home and Garden
Trademark: Medas
Transport Package: Carton
Origin: China
HS Code: 8413609010
Easy disassemble and cleaning Fountain PumpCellars, Swimming pool, Pond, flooded area…Â
Â
Company information