CG fuel tank, side cover, frame body, front
and rear wheel, front and rear tire, front and rear shock, spoke wheel, rim,
seat, carrier, mirror, speedometer, handle switch, head light, rear lights,
turning lights, handle bar, main stander, side stander, rear fork, hub cover,
hub, air filter, battery, axle, cables, wire harness, regulator, flash, start
relay, CDI, horn, fuel lock, chain, muffler, steering stem, chain cover, brake
pedal, front and rear fender, springs, front safe guard, back seat, helmet.
Motorcycle Spare Parts,Cnc Motorcycle Spare Parts,Custom Motorcycle Spare Parts,Aluminum Motorcycle Spare Parts JIANGMEN CHANGHUA GROUP CO., LTD. , http://www.changhuagroup-motor.com
As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components.
Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles.
Chain No.Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin b2 (mm)
Inner width of inner link b1(min) (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attached plate h2 (mm)
Tensile strength Q (min.)(KN)
NE model lifting chain for elevators
NE15-101.6
101.6
26.5
11.5
70
27
6
35
35
128.1
NE30-152.4
152.4
35
15.5
90
36.5
8
50
50
245
NE50-152.4
152.4
35
15.5
90
36.5
8
50
110
245
NE100-200
200
42
19.1
120
51.8
10
60
125
375
NE150-200
200
48.5
22.23
120
57.8
10
60
125
375
NE300-250
250
70
35
165
75
16
100
150
450
NE300-250A
250
63.5
31.75
146
67.4
12
90
150
450
NP152.4
152.4
357
15.88
88
38
7.9
45
105
245
FE12600
152.4
35
15.88
86
36.5
7.9
45
120
245
NE100/2L
200
44.5
19.05
114
53
10
60
125
400
NE150-B/2L
200
44.5
19.05
114
53
10
60
125
400
NE200/2L
250
63.5
31.75
140
67.4
12
90
150
750
9060 G4/4L
152.4
34.93
19.05
94.5
38.1
9.5
50.8
120
312
P152.4-A/2L
152.4
36
17.33
85
36.5
8
50
105
160
DK 19200M G4/2L
200
38.1
15.77
86
36.5
8
45
125
312
NE150-A/2L
200
48.5
22.23
122
57.6
10
75
125
529
P152.4 3L
152.4
31.75
15.77
109
54
9.6
38.1
139.7
145
P125/2L
125
52
17
80
31
8
580
100
219.52
FE12600-S/2L
152.4
34.93
15.88
86
36.5
7.9
45
120
160
NE150/2L
200
48.5
22.23
118
57.6
10
75
125
529
NE300-250/2L
250
70
35
165
75
16
100
150
1107
P152.4/2L
152.4
35.7
15.88
88
38
7.9
45
105
160
DS17200-S G4/2L
200
40.08
19.05
106.5
50.8
9.5
50.8
130
260
P250-G4/2L
250
73
38.5
183.5
82
16
115
180
1200
NE300
250
70
35
165
75
16
100
150
1107
Dimensions of attached plate
Chain No.
d4 (mm)
L1 (mm)
L2 (mm)
NE15-101.6
10
50
50
NE30-152.4
15
75
70
NE50-152.4
15
75
70
NE100-200
15
75
70
NE150-200
18
100
80
NE300-250
18
140
100
NE300-250A
20
140
100
NP152.4
15
75
70
FE12600
15
75
70
Why Choose DCC?
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.12years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
If you need more information about this chain,please send email to us any time ,
Wiish we will promote business as well as friendship!
Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength.
As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components.
Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles.
Chain No.Pitch P (mm)
Diameter of roller d1 (mm)
Diameter of pin d2 (mm)
Length of pin b2 (mm)
Inner width of inner link b1(min) (mm)
Thickness of sidebar T (mm)
Height of sidebar h2 (mm)
Height of attached plate h2 (mm)
Tensile strength Q (min.)(KN)
NE model lifting chain for elevators
NE15-101.6
101.6
26.5
11.5
70
27
6
35
35
128.1
NE30-152.4
152.4
35
15.5
90
36.5
8
50
50
245
NE50-152.4
152.4
35
15.5
90
36.5
8
50
110
245
NE100-200
200
42
19.1
120
51.8
10
60
125
375
NE150-200
200
48.5
22.23
120
57.8
10
60
125
375
NE300-250
250
70
35
165
75
16
100
150
450
NE300-250A
250
63.5
31.75
146
67.4
12
90
150
450
NP152.4
152.4
357
15.88
88
38
7.9
45
105
245
FE12600
152.4
35
15.88
86
36.5
7.9
45
120
245
NE100/2L
200
44.5
19.05
114
53
10
60
125
400
NE150-B/2L
200
44.5
19.05
114
53
10
60
125
400
NE200/2L
250
63.5
31.75
140
67.4
12
90
150
750
9060 G4/4L
152.4
34.93
19.05
94.5
38.1
9.5
50.8
120
312
P152.4-A/2L
152.4
36
17.33
85
36.5
8
50
105
160
DK 19200M G4/2L
200
38.1
15.77
86
36.5
8
45
125
312
NE150-A/2L
200
48.5
22.23
122
57.6
10
75
125
529
P152.4 3L
152.4
31.75
15.77
109
54
9.6
38.1
139.7
145
P125/2L
125
52
17
80
31
8
580
100
219.52
FE12600-S/2L
152.4
34.93
15.88
86
36.5
7.9
45
120
160
NE150/2L
200
48.5
22.23
118
57.6
10
75
125
529
NE300-250/2L
250
70
35
165
75
16
100
150
1107
P152.4/2L
152.4
35.7
15.88
88
38
7.9
45
105
160
DS17200-S G4/2L
200
40.08
19.05
106.5
50.8
9.5
50.8
130
260
P250-G4/2L
250
73
38.5
183.5
82
16
115
180
1200
NE300
250
70
35
165
75
16
100
150
1107
Dimensions of attached plate
Chain No.
d4 (mm)
L1 (mm)
L2 (mm)
NE15-101.6
10
50
50
NE30-152.4
15
75
70
NE50-152.4
15
75
70
NE100-200
15
75
70
NE150-200
18
100
80
NE300-250
18
140
100
NE300-250A
20
140
100
NP152.4
15
75
70
FE12600
15
75
70
Why Choose DCC?
1.Changzhou Dongwu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,
2.we occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and test devices.
3.we passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .
4,we have 75% of products which are exported to Europe,America,Japan , Southeast Asia ,and so on,
5.12years factory experience ,Nearly all the parts are produced by our own factory,therefor we can control the cost and quality.
Choose DCC,you choosed High quality , competitive price,perfect service,
If you need more information about this chain,please send email to us any time ,
Wiish we will promote business as well as friendship!
Forged Bucket Elevator Conveyor Chain with ISO Approved
Model NO.: NE model lifting chain for elevators
Samples: Free
Standards: Produce According to Approved Drawing
Structure (for Chain): Roller Chain
Trademark: DCC
Specification: ISO, SGS
Origin: Changzhou, Jiangsu, China
HS Code: 731589
Model NO.: NE model lifting chain for elevators
Samples: Free
Standards: Produce According to Approved Drawing
Structure (for Chain): Roller Chain
Trademark: DCC
Specification: ISO, SGS
Origin: Changzhou, Jiangsu, China
HS Code: 731589
Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength.