Galvanized Metal Sheet Square Downspout Pipe Roll Forming Machine
Posted on

Model NO.: SH-DP
Voltage: 380V
Main Motor Power(W): 7.5 Kw
Warranty: 12 Months
Control System: PLC with Touch Screen
Machine Running: Smoothly and Steadily
Material Thickness: 0.5-0.6mm
Forming Speed: 12-15m/Min
Main Motor Power: 7.5kw
Cutting Blade Material: Cr12
Trademark: Suhang
Specification: CE. SGS. ISO9001: 2008
Origin: Wuxi, Jiangsu
HS Code: 8455229090
Galvanized Metal Sheet Square Downspout Pipe Roll Forming Machine


Technical parameter:

1. Machine specification: Forming thickness(0.5-0.6)xL, yield strength≤ G250Mpa
2. Forming speed: 12-15M/min (EXCLUDING CUTTING STOP TIME)
3. Forming roller: About 24 groups
4. Main motor power: 7.5KW
5. Hydraulic station power: 4KW
6. Roller material: 45# forged steel, surface coated with chrome
7. Main shaft material: 45# steel
8. Main axis dia.: ¢ 68mm
9. Hydraulic cutting pressure: 10-12Mpa
10. Cutting method: Hydraulic powered, cutting after roll forming.
11. Cutting blade material: Cr12 quenching treatment
12. Electrical controlling system: Whole line adopted PLC control, cut to length tolerance≤ 2mm

Flow Chart
Uncoiling – Infeed Guiding– Roll forming – Tighten – Hydraulic cutting – Run-out table
Serial No. Commodity & Description Quantity
1 3T manual uncoiler 1 set
2 Infeed guiding  1 set
3 Main roll forming machine 1 set
4 Tighten device 1 set
5 Hydraulic cutting equipment 1 set
6 Output table 1 set
7 Main drive 1 set
8 Hydraulic system 1 set
9 Controlling system (including cabinet) 1 set
10 Downpipe elbow forming machine 1 set

Saw Blade Sharpening Machine

Automatic Saw Blade Sharpening Machine,Sharpening Machine For Saw Blade,Sharpening Machine,Circular Saw Blade Sharpening Machine

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctkcutting.com