Aluminum Polishing Sheet is a special Aluminum Sheet.Its surface has been polished hence gives good performance in surface condition.The advantage of aluminum sheet is as follows:
1. Easy to process.
Aluminum Panel Sheet,Polished Aluminum Sheet,Polished Aluminium Sheet,Aluminium Profile Sheet Trumony Aluminum Limited , https://www.szaluminumsheets.com
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator
R series: Pneumatic roller vibrator
SK series: Impact air hammer
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size
Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.
Design:
The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.
Technical Parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
GT-10
27.500
35.000
37.500
0.840
1.390
2.400
46
80
112
GT-13
26.000
30.000
33.000
1.400
2.440
3.730
120
200
290
GT-16
17.000
21.500
24.000
1.220
2.090
3.160
120
200
290
GT-20
17.000
20.000
23.000
2.170
4.040
5.520
185
325
455
GT-25
12.000
15.500
17.000
2.120
3.510
5.070
185
325
455
GT-32
13.000
14.000
16.000
3.380
5.430
7.540
330
530
745
GT-36
7.800
10.000
13.000
3.300
5.000
7.150
330
530
745
GT-40
7.500
8.800
9.500
4.350
7.350
9.850
408
428
680
GT-48
5.800
7.500
9.700
4.950
7.750
10.6007
408
428
680
GT-60
4.758
6.530
8.515
5.700
9.800
11.150
505
600
920
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator
R series: Pneumatic roller vibrator
SK series: Impact air hammer
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size
Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.
Design:
The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.
Technical Parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
GT-10
27.500
35.000
37.500
0.840
1.390
2.400
46
80
112
GT-13
26.000
30.000
33.000
1.400
2.440
3.730
120
200
290
GT-16
17.000
21.500
24.000
1.220
2.090
3.160
120
200
290
GT-20
17.000
20.000
23.000
2.170
4.040
5.520
185
325
455
GT-25
12.000
15.500
17.000
2.120
3.510
5.070
185
325
455
GT-32
13.000
14.000
16.000
3.380
5.430
7.540
330
530
745
GT-36
7.800
10.000
13.000
3.300
5.000
7.150
330
530
745
GT-40
7.500
8.800
9.500
4.350
7.350
9.850
408
428
680
GT-48
5.800
7.500
9.700
4.950
7.750
10.6007
408
428
680
GT-60
4.758
6.530
8.515
5.700
9.800
11.150
505
600
920
The results show that the casting aluminum alloy with good casting property or deformation aluminum alloy with good processing plasticity can be obtained by adding certain Ba Au Du element.
2. Good conductivity and thermal conductivity.
The electrical and thermal conductivity of aluminum is second only to silver, copper and gold.
3. The density is small.
The density of aluminum and aluminum alloy is close to 2.7 g / about 1 / 3 of that of iron or copper.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.
Gt-16 Series Pneumatic Gear Vibrator for Material Handling
Model NO.: GT-16
Type: Gear Type Vibrator
Effext: Material Handling
Trademark: SMARTSOLU
Transport Package: PP Pag+Box+Carton
Specification: CE
Origin: China
HS Code: 8479899990
Model NO.: GT-16
Type: Gear Type Vibrator
Effext: Material Handling
Trademark: SMARTSOLU
Transport Package: PP Pag+Box+Carton
Specification: CE
Origin: China
HS Code: 8479899990
We have the following types: