Heilongjiang Fisheries Research Institute Chromatography solution impurity filter device patented
Posted on

[China Instrument Network Instrument R&D] A few days ago, the Chinese Academy of Fishery Sciences Heilongjiang Fisheries Research Institute Sun Yanchun and others applied for a “liquid chromatographic solution impurity filter device” obtained a national utility model patent, and the patent number was ZL 2016 2 0734991.0.

Image from the network
The utility model discloses a solution impurity filter device for chromatograph, which comprises a box body. A center shaft is installed through the rotation of a bearing at the top middle position of the box body, and a hopper is arranged on the top of the box body at the upper end of the center shaft. The bottom of the body is also provided with a pulley on the central shaft, and the pulley is connected with the drive motor at the top of the cabinet through the transmission belt.
The inside upper part of the box is provided with a shunt tube on the central axis. The inside of the box is provided with an impurity pushing plate at the lower end of the central axis. The impurity pushing plate is provided with a filter screen plate on the lower side. The upper side of the filter screen plate is on the impurity outlet. A meshed communicating pipe is connected to the other end of the meshed communicating pipe.
The utility model has the advantages of simple structure, impurity filtering of the solution entering the chromatograph, preventing the unmelted particles from entering the chromatograph and plugging the pipeline, causing the instrument to stop in trouble, guaranteeing the smooth progress of the detection work and satisfying the requirement of the high-throughput detection work. , And then improve work efficiency.
(Original title: "A Solution Impurity Filtration Device for Chromatograph" Obtained National Patent Grant)

Plastic Precision Machining

In the CNC machining industry, in addition to metal CNC machining, plastic CNC machining is also relatively common. The two are also very different in terms of machining, the selected tools are also different, and there are also essential differences in speed and cooling. Due to the internal stress of the plastic, it is easy to crack and deform, so in the process of processing, it is necessary to control the speed of the tool and the problems of cooling. In short, CNC machining of metal parts and plastic parts is essentially different in the selection of tools, programming of tool paths, determination of tool speed and determination of cooling schemes. It is necessary to fully select and design materials according to material characteristics and processing experience. Only by determining various factors can we produce efficient and qualified products.

Machining metal parts and machining plastic parts are two separate departments at SCZY, each with its own processing equipment, tools and processing technicians. This ensures the durability of the equipment and the experience and professionalism of the technicians. Please contact us to discuss CNC machining knowledge.

Plastic Machining

Plastic CNC Machining, Machining Of Plastic Parts, Plastic Machining Parts, CNC Plastic, Plastic Precision, Plastic Part,CNC Machining for Plastic

Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com