The scorching summer needs to strengthen the care for bulk feed carriers. Recently, this kind of weather caused the tyres to rise due to the principle of thermal expansion and contraction. Therefore, when pumping up the tires of a vehicle, it should not be too full. You can also choose to add nitrogen to your tires because the thermal stability of nitrogen will be better, preventing punctures in hot weather. In the rainy weather, the bulk feed carrier must observe the wear of the tire tread. If the tread wear is serious, it needs to be replaced immediately.

In the hot season, the most important thing to prevent is the high temperature of the engine of the bulk feed truck. If the engine temperature is too high, it is necessary to immediately perform cooling protection. The cooling of the engine of the bulk feed carrier can be carried out in several ways. The first is the use of high-viscosity engine oil for use in the summer, the second is the timely cleaning of the fan, and finally the need for the vehicle cooling system to operate. Check in place to ensure that the cooling system has a smooth running condition.

The next step is to do a good job of protecting the tanks of bulk feed carriers, because the tanks are the most important box cooling system for bulk feed trucks. It is also guaranteed that the cooling system has a performance effect. Moreover, in the hot summer season, it is more important to exist. It is necessary to ensure that the quantity of water tanks in bulk feed carriers is sufficient enough. If it is found that water in the tanks of vehicles has appeared in the presence of boiling cylinders, then it is necessary to The structure lid is opened to cool it down. To avoid the driver being burned, wait until the water temperature is lowered before opening the lid for the next inspection.

Aluminum Die Casting

In the entire die casting industry, the use of aluminum alloy die castings accounts for the highest proportion. Aluminum die casting parts are mainly used in industries such as home appliances, motors, communications, automobiles, and electronics. Some are also used in parts of aviation, navigation and some equipment. Using die-casting processing, the dimensional accuracy of die casting part is relatively high, the surface finish is relatively good, the strength and hardness are high, and the productivity and material utilization rate are relatively high. There are also some problems in the die-casting process, such as cracks, which requires us to anneal the die-casting mold regularly to eliminate the stress in the cavity, or sometimes there are cracks on the surface of the cavity, the surface is polished to remove cracks. And the mold is preheated evenly.

SCZY conducts one-stop services such as mold manufacturing, die-casting production and subsequent CNC machining in-house to ensure production delivery and product quality. We have a relatively systematic understanding of the die-casting process, can predict the problems that may arise in the die-casting process, and can solve the possible problems in advance.

Aluminum Die Casting,Aluminum Alloy Gravity Casting,Aluminum Engine Parts Die Casting,Aluminum Alloy Engine Parts Die Casting,Aluminum Die Casting Parts

Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com