A heat sink is a device that incorporates a fan or another mechanism to reduce the temperature of a hardware component (e.g., processor). There are two heat sink types: active and passive. The picture is an example of a heat sink with both active and passive cooling mechanisms.
More services we offer:
Product description:
Mosfet Heatsink,Aluminum Alloy Mosfet Heatsink,1000W Mosfet Heatsink,High Voltage Mosfet Timeplex Industrial Limited , https://www.timeplexhks.com
1.The extraordinary design of aluminum welding program solves difficult to fuse   of welding aluminum  when arc start  and welding defect when arc end.Â
2.With enhanced double pulse function, wire feed speed and output energy are controlled cooperatively, especially in the welding of aluminum alloy to achieve a perfect fish scale weld and improve weld seam quality
3.Users can store custom 100 sets of welding specification parameters.
4.The multi-functional interface module designed for automatic welding of robots, special planes, etc., with the most concise and reliable connection, realizes full-featured control, and is easier to use and maintain for customers. At present, it has successfully established cooperation relationships with many robot manufacturers.
MIG-350PC/500PC double pulse MIG welder standard configuration:
Water cooling wire feeder q set( 5 meter cable
3 meter water cooling welding gun 1 piece(European connector)
2 meter ground cable 1 set
CT-10B water cooler 1 piece.
CO2 gas valve 1 pice(AC36V 25L/min)
Wheel bracket
MIG-500D single pulse MIG welder standard configuration
air cooling wire feeder 1 set(5 meter cable)
3 meter air cooling welding gun 1 set(European connector)
2 meter ground cable 1 set
CO2 gas valve 1 piece(AC36V 25L/min)
Optional accessaries:
Welding tractor,Argon meter,Push-pull welding torch,Gas proportioner,Digital remote control box.
Remarks:  MIG-350P,MIG-500P  without  water cooler and wheel bracket.
          MIG-350PC,MIG-500PC  with  contain water cooler and wheel bracket.
MIG-350P Â double pulsed MIG/flux cored welder :
MIG-500PC double pulsed MIG/flux cored welder with water cooler :
MIG-500D single phase MIG/flux cored welder:
Technical paramters:
Â
Model
MIG-350P(C)
MIG-500P(C)
MIG-500D
Voltage/frequency
             3 phase 380V+-10%  50/60 HZ
Rated input capacity(KVA)
14.4
            25
Rated input current(A)
25
             46
Rated duty cycle
                        60
Open load voltage(V)
96
98
Range of output current(A)
25-350
20-500
60-500
Range of output voltage(V)
14-40
           14-50
Power factor
                       87
Wire diameter
                         0.8-1.6Â
gas flow(L/min)
                   15-20
torch cooling method
            air cooling or water cooling
Degrees of protection provided by enclosure
                         IP21
Insulation grade
                        F
power source /N.W(KG)
43(86)
54(103)
47
Power supply/packing dimension(mm)
340*660*650(510*960*1200)
340*740*730(560*1040*1200)
340*700*710
FAQ:
1. Q: Are you manufaturer or trading company?
A: We are a factory with 28 years manufacturing experience.our main products is IGBT inverter air plasma cutter,CNC cutting machine,welding machine,beveling machine.
2. Q: what certificate do you get?
A: CE ,ISO,CCC and SGS.
3 Q:How many days for mass production?
   A:15 working days after receipt of remittance.
4Â Â Q:what is your garantee period?
   A:1 year.spare parts will be sent to you for free if machine broken down within 1 year.
5Â Â Q:what after-sale service do you offer?
A: 24 Hours Online Service, Free spare parts for breakdown machine in warranty service
About CHD
Founded in 1989, WenZhou CHD Welding Equipment Factory is China's famous cutting machine, beveling machine, welding machine and accessories manufacturer, with 3 production bases located in Shanghai, Wenzhou and Chengdu and plant area of 53,000 square meters.have passed authoritative certification such as the ISO9001 and Switzerland SGS, France BV.10 kind of products has passed  the EU CE certification.Wenzhou CHD have applied for more than 10 patents, have participated in the drafting of three Chinese national standards, been rated as famous brand in Shanghai. With marketing and service agencies covering more than 70 countries.
Exhibition
CHD have participated in all kinds of the welding exhibitions more than 100 times since 1989 when enterprise started to run over the last decade.we attend at least 6 exhibitions annually.Â
1989-2015 all the Beijing Essen Welding&Cutting Exhibitions
1989-2015 all the China welding expositions.
and exhibitions in Russia,Austrilia,India,Brazil,Vietnam&all over the mainland China.
Â
Main Features:
1.The extraordinary design of aluminum welding program solves difficult to fuse   of welding aluminum  when arc start  and welding defect when arc end.Â
2.With enhanced double pulse function, wire feed speed and output energy are controlled cooperatively, especially in the welding of aluminum alloy to achieve a perfect fish scale weld and improve weld seam quality
3.Users can store custom 100 sets of welding specification parameters.
4.The multi-functional interface module designed for automatic welding of robots, special planes, etc., with the most concise and reliable connection, realizes full-featured control, and is easier to use and maintain for customers. At present, it has successfully established cooperation relationships with many robot manufacturers.
MIG-350PC/500PC double pulse MIG welder standard configuration:
Water cooling wire feeder q set( 5 meter cable
3 meter water cooling welding gun 1 piece(European connector)
2 meter ground cable 1 set
CT-10B water cooler 1 piece.
CO2 gas valve 1 pice(AC36V 25L/min)
Wheel bracket
MIG-500D single pulse MIG welder standard configuration
air cooling wire feeder 1 set(5 meter cable)
3 meter air cooling welding gun 1 set(European connector)
2 meter ground cable 1 set
CO2 gas valve 1 piece(AC36V 25L/min)
Optional accessaries:
Welding tractor,Argon meter,Push-pull welding torch,Gas proportioner,Digital remote control box.
Remarks:  MIG-350P,MIG-500P  without  water cooler and wheel bracket.
          MIG-350PC,MIG-500PC  with  contain water cooler and wheel bracket.
MIG-350P Â double pulsed MIG/flux cored welder :
MIG-500PC double pulsed MIG/flux cored welder with water cooler :
MIG-500D single phase MIG/flux cored welder:
Technical paramters:
Â
Model
MIG-350P(C)
MIG-500P(C)
MIG-500D
Voltage/frequency
             3 phase 380V+-10%  50/60 HZ
Rated input capacity(KVA)
14.4
            25
Rated input current(A)
25
             46
Rated duty cycle
                        60
Open load voltage(V)
96
98
Range of output current(A)
25-350
20-500
60-500
Range of output voltage(V)
14-40
           14-50
Power factor
                       87
Wire diameter
                         0.8-1.6Â
gas flow(L/min)
                   15-20
torch cooling method
            air cooling or water cooling
Degrees of protection provided by enclosure
                         IP21
Insulation grade
                        F
power source /N.W(KG)
43(86)
54(103)
47
Power supply/packing dimension(mm)
340*660*650(510*960*1200)
340*740*730(560*1040*1200)
340*700*710
FAQ:
1. Q: Are you manufaturer or trading company?
A: We are a factory with 28 years manufacturing experience.our main products is IGBT inverter air plasma cutter,CNC cutting machine,welding machine,beveling machine.
2. Q: what certificate do you get?
A: CE ,ISO,CCC and SGS.
3 Q:How many days for mass production?
   A:15 working days after receipt of remittance.
4Â Â Q:what is your garantee period?
   A:1 year.spare parts will be sent to you for free if machine broken down within 1 year.
5Â Â Q:what after-sale service do you offer?
A: 24 Hours Online Service, Free spare parts for breakdown machine in warranty service
About CHD
Founded in 1989, WenZhou CHD Welding Equipment Factory is China's famous cutting machine, beveling machine, welding machine and accessories manufacturer, with 3 production bases located in Shanghai, Wenzhou and Chengdu and plant area of 53,000 square meters.have passed authoritative certification such as the ISO9001 and Switzerland SGS, France BV.10 kind of products has passed  the EU CE certification.Wenzhou CHD have applied for more than 10 patents, have participated in the drafting of three Chinese national standards, been rated as famous brand in Shanghai. With marketing and service agencies covering more than 70 countries.
Exhibition
CHD have participated in all kinds of the welding exhibitions more than 100 times since 1989 when enterprise started to run over the last decade.we attend at least 6 exhibitions annually.Â
1989-2015 all the Beijing Essen Welding&Cutting Exhibitions
1989-2015 all the China welding expositions.
and exhibitions in Russia,Austrilia,India,Brazil,Vietnam&all over the mainland China.
Â
Besides of Metal Stamping Components,the Amplifiers metel chassises and Panels, we also complete solution for OEM/ODM Products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, PVC Fittings ,pvc conduit fittings, Plastic Injection Components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.
The material used partly determines the extent of thermal conductivity. Copper and aluminum are the most widely used materials, though aluminum is the more common choice because copper is more expensive and heavier. Aluminum 6061 and 6063 are widely used with a thermal resistance of 166 and 201 W / mK, respectively.
IGBT inverter double pulsed MIG/MAG/CO2 flux cored welder with wire feeder MIG-350P/500P
Model NO.: MIG-350P
welding material: steel,cooper,aluminum,brass, stainless steel
welding gas: Ar or CO2 or mixed gas
Pulse: double pulse
Trademark: CHD
Transport Package: Wooden Case
Specification: 510*960*1200mm
Origin: Shanghai China
HS Code: 8468200010
Model NO.: MIG-350P
welding material: steel,cooper,aluminum,brass, stainless steel
welding gas: Ar or CO2 or mixed gas
Pulse: double pulse
Trademark: CHD
Transport Package: Wooden Case
Specification: 510*960*1200mm
Origin: Shanghai China
HS Code: 8468200010
Main Features: