Metal detector splitter

Application:

Metal separator is used for the detection of industrial products of iron, stainless steel, copper, aluminum and all other metal impurities, such as in the food, plastics, pharmaceutical products production process,it's easy to mix metal impurities, not only affect the quality of products, also do a lot of harm to consumers.

 

Main Feature:
(1) The rapid separation of various metals in plastic materials, including "ferrous" and "non ferrous"
(2) High sensitivity, small metal particles such as 0.4mm, which can be adjusted according to the actual production
(3) Full automatic operation, saving manpower
(4)Each package of plastic processing time is about 4 minutes


What can we bring for you?
Reduce damaging risks of metals existing in the raw materials to screws of the molding equipment and decrease the maintenance costs;
Avoid production halts which are caused by blockage of nozzles of the moldings machine;
Improve quality of the products and the production efficiency

Equipment installation
Can be installed on the charging basket;
Can be installed on the molding machine;
Can be installed inside the pipeline.

Metal detector splitter

Application:

Metal separator is used for the detection of industrial products of iron, stainless steel, copper, aluminum and all other metal impurities, such as in the food, plastics, pharmaceutical products production process,it's easy to mix metal impurities, not only affect the quality of products, also do a lot of harm to consumers.

 

Main Feature:
(1) The rapid separation of various metals in plastic materials, including "ferrous" and "non ferrous"
(2) High sensitivity, small metal particles such as 0.4mm, which can be adjusted according to the actual production
(3) Full automatic operation, saving manpower
(4)Each package of plastic processing time is about 4 minutes


What can we bring for you?
Reduce damaging risks of metals existing in the raw materials to screws of the molding equipment and decrease the maintenance costs;
Avoid production halts which are caused by blockage of nozzles of the moldings machine;
Improve quality of the products and the production efficiency

Equipment installation
Can be installed on the charging basket;
Can be installed on the molding machine;
Can be installed inside the pipeline.

Directional control valves (DCVs) are one of the most fundamental parts of hydraulic and pneumatic systems. DCVs allow fluid flow (hydraulic oil, water or air) into different paths from one or more sources. DCVs will usually consist of a spool inside a cylinder which is mechanically or electrically actuated. The position of the spool restricts or permits flow, thus it controls the fluid flow.

The spool (sliding type) consists of lands and grooves. The lands block oil flow through the valve body. The grooves allow oil or gas to flow around the spool and through the valve body. There are two fundamental positions of directional control valve namely normal position where valve returns on removal of actuating force and other is working position which is position of a valve when actuating force is applied. There is another class of valves with 3 or more positions that can be spring centered with 2 working position and a normal position.

GRH appreciates your enquiry upon your hydraulic system.

Sectional Valves

Section Valve,Hydraulic Sectional Valves,Pressure Control Sectional Valve,Sectional Valves

GRH , https://www.grhcn.net