Ldf Series Marine Environment Equipment Waste Incinerator
Posted on

Model NO.: LDF
Working Temperature: 850~1150
Negative Pressure: 5-35 mm Wc
Electrical Power: 7kw
Total Weight: 1500kg
Trademark: HANGYU
Transport Package: Wooden Case
Specification: CCS, ABS, DNV, etc
Origin: China
HS Code: 8417809090
LDF Series Marine environment equipment Waste Incinerator 
marine waste oil incinerator
waste burner
marine waste oil incinerator   

Overview
The incinerator is equipped with two doors, which are intended for ash removing, the incinerator in stand-by mode (Com.Tem. less than 220ºC), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till Com.Tem. less than 100ºC and incinerator fully stop. Meanwhile, there is a feeding device available for solid waste feeding continuously during system in operation.
 
The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and operator panel. The electric panel is built according to international standards for marine equipment. The operator panel which is located at the right side of the control panel has a touch screen and defined keys for system starting /stopping and selecting burner modes.
 
The burning process is controlled by the PLC and monitored by the HMI(Human Machine Interface) and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.
 
Usage
The marine Incinerator which is designed for on board incineration of
ship's waste oil and solid,
 
Main parts:
Incinerator
Burner
Combustion chamber with diesel oil burner, sludge burner, and electric control panel
Flue gas fan
Flue gas damper
Sludge tank with circulating pump and heater
Sludge circulation pump
Sludge dosing pump
Electrical control panel
Expansion Bellow
Feeding Set
 
Three different heat forms,
you can choose any of them
Electric Heater
Steam Heating
Thermal oil heating

Main parameter 
   Model  HYINC-18  HYINC-50 HYINC-80
  Capacity  22.5KG/H 63KG/H 100KG/H
180,000KCAL/H
  (208KW)		 500,000KCAL/H 
  (580KW)		  800,000KCAL/H
  (929kW)
Electrical power
Consumption		    7 kw   12kW    15kw 
Total weight    1500kg   2900 kg    5000 kg
 

Approval 
RS , USCG , CCS ,NK,etc
 
Ldf Series Marine Environment Equipment Waste Incinerator

Ldf Series Marine Environment Equipment Waste Incinerator
Ldf Series Marine Environment Equipment Waste Incinerator

Aluminum High Frequency Welding Pipe

Aluminum High Frequency Welding Pipe is a special Aluminum Tube used high frequency welding machine.It has high precise in the welding area and the pressure test of the tube is with great performance.Aluminum High Frequency Welding Pipe is widely used in automobile industry.Normally it is used as aluminum radiator tube.Trumony has a variety of the tooling which enables our clients to save cost in their invention stage.The trend of Aluminum High Frequency Welding Pipe is using high strength material so that the thickness of the Aluminum High Frequency Welding Pipe can be reduced.Finally the cost of production is reduced and the weight of the automobile is reduced.

Keeping on innovation and bring technology to be ground using our Aluminum High Frequency Welding Pipe is Trumony's target.

Flat Oval Aluminum Tube,Flexible Aluminum Tubing,Seamless Aluminum Tubing,High Frequency Welded Pipe

Trumony Aluminum Limited , https://www.szaluminumplate.com