Pre-Tensioned Concrete Electric Pole Spinning Steel Mold

Sales Manager:Sally Wu
Mobile:0086 15305399025
   

1.simple introduction of concrete electric pole making line

Pre-stressed Concrete Electric Pole Making Machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.

Pre-stressed Concrete Electric Pole Making Machine is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes and piles are good at quality.

The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.

2. Working Principle  of concrete electric pole making line

1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.

2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.

3. The speed of separation is slow when the viscosity of slurry is high.

4. It is good for centrifugal sedimentation when the slurry density is different in each component.

3. Technical Parameter of concrete electric pole making line

4.Advantanges of concrete electric pole making line

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.

   
(1)concrete electric pole mould
(2)  centrifugal spinning machine

(3)Feeding material for concrete electric pole making line

(4)Put steel bar for concrete electric pole making line

(5)Tension for concrete electric pole making line

(6) spinning and moulding

6.Warmly welcome to visit our factory.Shengya is ur best choice!

 

Pre-Tensioned Concrete Electric Pole Spinning Steel Mold

Sales Manager:Sally Wu
Mobile:0086 15305399025
   

1.simple introduction of concrete electric pole making line

Pre-stressed Concrete Electric Pole Making Machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.

Pre-stressed Concrete Electric Pole Making Machine is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes and piles are good at quality.

The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.

2. Working Principle  of concrete electric pole making line

1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.

2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.

3. The speed of separation is slow when the viscosity of slurry is high.

4. It is good for centrifugal sedimentation when the slurry density is different in each component.

3. Technical Parameter of concrete electric pole making line

4.Advantanges of concrete electric pole making line

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.

   
(1)concrete electric pole mould
(2)  centrifugal spinning machine

(3)Feeding material for concrete electric pole making line

(4)Put steel bar for concrete electric pole making line

(5)Tension for concrete electric pole making line

(6) spinning and moulding

6.Warmly welcome to visit our factory.Shengya is ur best choice!

 

For the wide range of Applications of hydraulics, high temperature cooling of hydraulic oil is the key to ensure the good operation of the equipment. We have accumulated a lot of experience in design calculation and production in the 20 years of hydraulic oil cooling. Whether the unit is a Hydraulic Oil Cooler or a hybrid hydraulic Oil Cooler, we can individually customize the product according to the individual needs of the customer's industrial hydraulic equipment. At the same time, we also offer a standard hydraulic oil cooler series solution to ensure the performance at the same time. Avoid long-term problems with separate designs, and we offer different cooling drive methods for different application areas, such as hydraulic motors, DC motors, AC motors, explosion-proof motors, pneumatic motors, etc.

Because hydraulic technology has many outstanding advantages, it has been widely used from civilian to national defense, general transmission to highly accurate control systems. In the defense industry. Many of the weapons and equipment of the Air Force have adopted hydraulic transmission and control. Such as airplanes, tanks, ships, radars, artillery, missiles and rockets. In the machine tool industry, 85% of the current machine tool transmission systems use hydraulic transmission and control, such as grinding machines, milling machines, planers, broaching machines, presses, shearing machines and combination machine tools.

In the metallurgical industry, electric furnace control systems, rolling mill control systems, open hearth charging, converter control, blast furnace control, strip deviation and constant tension devices all use hydraulic technology. In construction machinery, hydraulic transmissions such as excavators, tire loaders, truck cranes, crawler bulldozers, tire cranes, self-propelled scrapers, graders and vibratory rollers are commonly used.

In agricultural machinery, hydraulic technology is also widely used, such as combine harvesters, tractors and plows. In the automotive industry, hydraulic off-road vehicles, hydraulic dump trucks, hydraulic aerial work vehicles and fire trucks all use hydraulic technology; in the textile industry, plastic injection molding machines and rubber vulcanizers are used. Paper machines, printing presses and textile machines; in the marine industry, the application of hydraulic technology is very common, such as full hydraulic dredgers, salvage boats, piling boats, oil production platforms, hydrofoil ships, hovercrafts and ship auxiliary machines. recent years.

Hydraulic technology is also used in solar tracking systems, wave simulation devices, ship driving simulators, seismic reconstruction, rocket-assisted launching devices, aerospace environment simulations, and high-rise building anti-vibration systems and emergency braking devices.

Industrial Hydraulics Heat Exchanger

Industrial Hydraulics Heat Exchanger,Hydraulics Heat Exchanger,Hydraulic Heat Exchanger,Hydraulic Oil Heat Exchanger

Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermictransfer.nl