Introduce:
Temperature Humidity Testing Machine is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
 Â
Applications
- To simulate test environment with different temperature and humidity
- Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
- Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
- Uncover test unit weakness in a short-term test with accelerated time effect
Model |
HD-150T |
HD-408T |
HD-800T |
HD-1000T |
|
Size |
Studio Size(W*H*D)cm |
50*60*50 |
60*85*80 |
100*100*85 |
100*100*100 |
Machine Size(W*H*D)cm |
95*150*105 |
60*85*80 |
145*190*135 |
145*190*155 |
|
Performance |
Control Methods |
Balanced temperature humidity control system (BTHC) PID intelligent adjust |
|||
Temperature and Humidity Range |
-70°C~150°C; 20%-98%R.H |
||||
Accuracy |
±0.5°C, ±2.5%RH |
||||
Resolution |
±0.01°C, ±0.1%R.H |
||||
Heating Rate |
≤3°C/min |
||||
Cooling Rate |
Average 1°C/min |
||||
Internal Material |
SUS#304 stainless steel |
||||
External Material |
SUS#304 stainless steel or Antirust processing cold-rolled steel sheet(Spray) |
||||
Insulation Material |
Superfine wool + polyurethane foam |
||||
Regulator |
Cooling Mode |
Mechanical binary refrigeration way |
|||
Compressor |
Closed compressor (French Tecumseh or German Copeland ) |
||||
Refrigerant |
R23/R404A |
||||
Condensing Way |
Air-cooling and Water-cooling |
||||
Humidifier |
Stainless steel humidifying tube |
||||
Airflow Way |
Broadband-type forced air circulation |
||||
Controller |
Operate Interfaces |
Korea TEMI 880 LCD touch screen |
|||
Memory capacity |
120 groups, each program 100 segment |
||||
Input |
PT100 or T thermocouple |
||||
Communicate Interface |
RS-232 |
||||
Subsidiary function |
Upper and lower alarm; self diagnosis ; alarm display(fault cause); time sequence protection (Automatic turn on or turn off ) |
||||
Water supply |
Water supply |
Circulating water supply |
|||
Water tank |
Built-in hand type(30Kg capacity) |
||||
Water quality |
resistance >500Ω.m |
||||
Standard Configuration |
One observe window(Double hollow toughened glass);one test pattern D50mm(on the left); 2 layers sample frame; one floodlight(fluorescent lamp);one water feeding tank; |
||||
Safety device |
Power leakage protection; Dry heating protection; Water system protection Over-temperature protection switch; Temperature deviation alarm, Compressor Overpressure; overload; Water shortage; Phrase shortage, etc. |
 Â
Featurers:
1.The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
 2.Available in Chinese and English LCD touch screen, easy operation and program.
 3.Able to display the relative date and information of the whole operating system in running mode, graphic display. precautions, maintenance and troubleshooting appear on the screen instantly.
 4.The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
 5.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
 6.Water Supply adopts automatic watering System, Circulating water supply together with water filter.
Â
Corresponding standard:
 GB11158 Technical conditions for high-temperature testing box
 GB10589-89 Technical conditions for low-temperature testing box
 GB10592-89 Technical conditions for high and low temperature testing box
 GB/T2423.4-93 Alternating hot and humid testing method
 IEC60068-2-2.1974 high-temperature testing method
 GJB150.3 high-temperature testing
 GJB150.4 low-temperature testing
 GJB150.9 humid testing
 GB/T2423.22-2001temperature testing method
 IEC60068-2-1.1990 low-temperature testing method
Â
The pictures of Temperature control  test chamber:


About Haida
HAIDA INTERNATIONALÂ is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.

After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
 Programmable Lab Stability Tester Temperature Humidity Testing Machine (HD-E702)
Introduce:
Temperature Humidity Testing Machine is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
 Â
Applications
- To simulate test environment with different temperature and humidity
- Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
- Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
- Uncover test unit weakness in a short-term test with accelerated time effect
Model |
HD-150T |
HD-408T |
HD-800T |
HD-1000T |
|
Size |
Studio Size(W*H*D)cm |
50*60*50 |
60*85*80 |
100*100*85 |
100*100*100 |
Machine Size(W*H*D)cm |
95*150*105 |
60*85*80 |
145*190*135 |
145*190*155 |
|
Performance |
Control Methods |
Balanced temperature humidity control system (BTHC) PID intelligent adjust |
|||
Temperature and Humidity Range |
-70°C~150°C; 20%-98%R.H |
||||
Accuracy |
±0.5°C, ±2.5%RH |
||||
Resolution |
±0.01°C, ±0.1%R.H |
||||
Heating Rate |
≤3°C/min |
||||
Cooling Rate |
Average 1°C/min |
||||
Internal Material |
SUS#304 stainless steel |
||||
External Material |
SUS#304 stainless steel or Antirust processing cold-rolled steel sheet(Spray) |
||||
Insulation Material |
Superfine wool + polyurethane foam |
||||
Regulator |
Cooling Mode |
Mechanical binary refrigeration way |
|||
Compressor |
Closed compressor (French Tecumseh or German Copeland ) |
||||
Refrigerant |
R23/R404A |
||||
Condensing Way |
Air-cooling and Water-cooling |
||||
Humidifier |
Stainless steel humidifying tube |
||||
Airflow Way |
Broadband-type forced air circulation |
||||
Controller |
Operate Interfaces |
Korea TEMI 880 LCD touch screen |
|||
Memory capacity |
120 groups, each program 100 segment |
||||
Input |
PT100 or T thermocouple |
||||
Communicate Interface |
RS-232 |
||||
Subsidiary function |
Upper and lower alarm; self diagnosis ; alarm display(fault cause); time sequence protection (Automatic turn on or turn off ) |
||||
Water supply |
Water supply |
Circulating water supply |
|||
Water tank |
Built-in hand type(30Kg capacity) |
||||
Water quality |
resistance >500Ω.m |
||||
Standard Configuration |
One observe window(Double hollow toughened glass);one test pattern D50mm(on the left); 2 layers sample frame; one floodlight(fluorescent lamp);one water feeding tank; |
||||
Safety device |
Power leakage protection; Dry heating protection; Water system protection Over-temperature protection switch; Temperature deviation alarm, Compressor Overpressure; overload; Water shortage; Phrase shortage, etc. |
 Â
Featurers:
1.The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
 2.Available in Chinese and English LCD touch screen, easy operation and program.
 3.Able to display the relative date and information of the whole operating system in running mode, graphic display. precautions, maintenance and troubleshooting appear on the screen instantly.
 4.The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
 5.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
 6.Water Supply adopts automatic watering System, Circulating water supply together with water filter.
Â
Corresponding standard:
 GB11158 Technical conditions for high-temperature testing box
 GB10589-89 Technical conditions for low-temperature testing box
 GB10592-89 Technical conditions for high and low temperature testing box
 GB/T2423.4-93 Alternating hot and humid testing method
 IEC60068-2-2.1974 high-temperature testing method
 GJB150.3 high-temperature testing
 GJB150.4 low-temperature testing
 GJB150.9 humid testing
 GB/T2423.22-2001temperature testing method
 IEC60068-2-1.1990 low-temperature testing method
Â
The pictures of Temperature control  test chamber:


About Haida
HAIDA INTERNATIONALÂ is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.

After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Â
Medium particle size micronized polyethylene wax,which can be used in coatings, printing inks and other various chemicals. It plays the role of scratch resistance, anti-blocking, abrasion resistance, and improving smooth feel.
Polyethylene MICRO-POWDER WAX IS A SPHERICAL HIGH-DENSITY POLYETHYLENE MICRO-POWDER WAX, which can be USED IN coatings, printing INks and other chemicals. It plays a role in scratch resistance, adhesion resistance, abrasion resistance and improving smooth hand feeling. CAS NO:9002-88-4
Micronized Wax Series,Micronized Pe Wax,Pyrolysis Micronized Pe Wax,Pyrolysis Polyethylene Wax
Hengshui Yimei New Material Technology Co.,Ltd , https://www.oxidizedpewax.com