Currently, a 3D printer manufacturer from Italy wants to purchase a water chiller to cool their extruding machine so that the water temperature can be kept at 20℃. According to the heating value of the extruding machine, we recommend S&A CW-6000 dual temperature water chiller to the customer with up to 3000W cooling capacity and ±0.5℃ precisely temperature control.
S&A recommends the customer to set the water chiller into the constant temperature mode to guarantee that the cooling temperature will be set at a fixed value (the fixed value required by the customer for the cooling is 20℃). The temperature control range of S&A water chiller is from 5 to 30℃. Therefore if the water chiller is operated at a temperature between 20-30℃, it can achieve the optimal refrigeration performance to prolong the service life.