Jack Stand,Jack And Jack Stands,Safe Jack Stands,Automotive Jack Stands WUQIANG HONGMA TOOLS MANUFACTURE CO., LTD , https://www.hmrapairtools.com
Radial Drilling Machine Lubrication System Check 1: Clean the linoleum, require complete oil cup, smooth oil passage, and bright oil window.
Radial Drilling Machine Cooling System Inspection 1. Clean the cooling pump, filter, and coolant sump.
2. Check the coolant line and require no water leakage.
Radial Drilling Machine Electrical System Inspection 1. Clean the dust inside and outside the motor and electrical box.
2. Turn off the power, open the appliance door, and check if the electrical connectors and electrical components are loose and aging.
3. Check that the limit switch is working properly. (Requires power check, pay attention to safety)
4. Whether the power to the door is turned on or not.
5. Check if the hydraulic system is normal and there is no oil leakage.
6. The electrical control switch is normal.
Radial Drilling Machine Repair
Application of PLC in Electric Control of Radial Drilling Machine Application of PLC to Electric... The use of programmable logic controller (PLC) to carry out technical transformation of the traditional relay-contactor electrical control system of radial drilling machine, and gives the radial drilling machine PLC electric control system design ladder diagram, input and output wiring diagram. The application of PLC not only greatly improves the reliability and anti-jamming ability of the electric control system of the radial drilling machine, but also greatly simplifies and reduces the workload of maintenance and ...
Radial drilling machine spindle feed box maintenance
1: Check the oil quality, keep it well, and the oil quantity meets the requirements.
2: Clear spindle taper burrs.
3: Clean the hydraulic transmission system, oil filter screen, adjust the oil pressure.
4: Remove the impurities on the spindle. The spindle is filled with oil to ensure lubrication of the spindle.
Radial drilling machine main features
Hydraulic rock drill main features:
1. Hydraulic preselected transmission mechanism saves auxiliary time
2. Spindle reversing, parking (brake), shifting, neutral, etc., controlled by one handle, easy to operate
3. Spindle box, rocker arm, inner and outer columns adopt hydraulically driven diamond block clamping mechanism, reliable clamping
4. The guide rails on the rocker arm, the spindle sleeve and the inner and outer column turning raceways are quenched to prolong the service life.
5. Spindle box movement in addition to manual, but also maneuver
6. Complete safety protection device and outer column protection and automatic lubrication device
Mechanical Radial Drilling Machine Features:
1, double speed motor
2, single-handle shift
3, interlocking clamping
4, mechanical and electrical double insurance
5, open power, emergency stop button
Radial Drilling Machine Main Parts Removal Order
(1) Turn off the power and remove all motors and related electrical components.
(2) Remove the headstock from the right end of the rocker arm.
(3) Support or lift the rocker arm and remove the lifting mechanism.
(4) Lift out the rocker arm.
(5) Lift out the outer column.
(6) Remove the inner column from the base.
(7) Remove the base (such as when repairing in situ or without surface planing, you do not have to detach the base).
Should be checked and noticed in daily use of radial drilling machine
Radial Drilling Machine Rocker Arms and Lifting Clamping Mechanism Inspection 1: Check that the adjustment of the lifting mechanism and the clamping mechanism is sensitive and reliable.