Some people always think that there is no difficulty in the operation of the sprinkler , as long as the switch is turned on to run on the road, but it is easier said than done, sprinkler is not so simple operation, and there is a certain in use skill.

First of all, the focus of the sprinkler is as its name suggests. Sprinklers sprinkle water of course, but some people use river channels and some river ponds instead of tap water or other water in order to save costs. The water, these sources of water will inevitably have impurities, but it can basically achieve the purpose, but the sprinkler in the suction water as much as possible into the water into the nozzle, so as not to inhale more sediment blocking the pipe, but the general configuration of the sprinkler will With more comprehensive filtration facilities, some rivers may not be deep if the water source is not deep enough so as not to inhale some impurities.

However, sometimes the sprinkler pumps for different models are also different. Some clear water pumps require clear water, but they cannot tolerate any impurities. Generally, when a pump is pumped, it usually needs some water diversion. When it is added, it needs to close its water inlet. Normally, it is used for the first time when it is used for water diversion. Do not add it afterwards. When entering the water, the water pipe should be kept as vacuum as possible so that the water can be sucked into the water tank more easily, and the water inlet system also needs a good seal, so as to ensure that the water can be sucked into the water.

Be sure to pay attention to the water in winter. Because the temperature in winter is low, the water in the compartment is very easy to freeze. Once the frozen water tank expands, it will freeze the water tank. Therefore, after the end of winter construction, you must know how to discharge water!

The position of the sprinkler head is also very important. The lower the position of the sprinkler, the greater the pressure of the spray. This can be used to clean the floor, and the spray head is higher in the density of the sprinkler. The effect of cleaning the dust is better. some. Sprinklers are also required to conduct regular effluent discharges, even if there are impurities in the clean water tank that need to be regularly removed.

Wear Resistant Steel Plate

Wear-resisting steel plate is composed of low Carbon Steel Plate and alloy wear-resisting layer. When working, the matrix provides comprehensive properties such as strength, toughness and plasticity of resisting external forces, and the alloy wear-resistant layer provides wear-resistant properties that meet the requirements of specified working conditions.
Wear-resisting steel alloy wear-resisting layer and base plate are metallurgical combination. By means of special equipment and automatic welding process, the high-hardness self-protecting alloy wire is uniformly welded on the substrate, and the composite layers are one to two or even more. In the composite process, due to the different shrinkage ratio of the alloy, uniform transverse cracks appear, which is a significant feature of the wear-resistant steel plate.

Wear Resistant Plate,Abrasion Resistant Steel Plate,Hardox Steel Plate,NM Steel Plate,Wear Resistant Sheet

Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.cnshansteel.com