GR (SHANDONG) NEW MATERIAL CO., LTD , https://www.grmaterial-film.com
·The new regulations for motor vehicles will be prohibited from January 1
From January 1st, 2018, the new safety technical conditions for motor vehicle operation GB 7258-2017 will be implemented in place of GB 7258-2012. The full name of GB 7258 is "Safety Technical Conditions for Motor Vehicle Operation", which is jointly issued by the General Administration of Quality Supervision, Inspection and Quarantine and the National Standardization Administration. The full technical content of the standard is mandatory and drafted in accordance with the rules given in GB/T 1.1-2009. This standard applies to all motor vehicles traveling on our roads, including traditional gasoline and diesel passenger cars, pure electric vehicles, passenger cars, school buses, trucks and motorhomes, but does not include trams and wheeled special machinery vehicles. Compared with the 2012 version, the new standard has more than 150 adjustments and modifications. Among them, there are many standards related to the majority of car owners, listed for reference. It should be noted that the new standard adjustment project has a transition period, and some standards are postponed for 13 months, 25 months and 37 months. Among all the standards, the most attention should be paid: the electric window has the anti-pinch function, the factory standard that cannot be arbitrarily hanged and the vehicle brand is not in compliance, and one reflective vest is required with the car.
The hanging vehicle logo should conform to the brand
The new standard adds a statement that “fits well with the vehicle brandâ€. In the old standard, driving a common brand car and replacing the logo with a high-end brand logo, because they are permanent trademarks and factory labels, can not be punished accordingly. Among the new standards, this behavior was “banned†and driving Zhongtai Automobile, only the trademarks and logos “consistent with the vehicle brand†can be hung. This means that Taobao buys other manufacturers' logos to hang, not only can not pass the annual inspection, but also will be issued a ticket by the traffic police on the road. Note that it is not allowed to make a personality and decoration around the trademark and the factory logo, which is also not in compliance with the regulations.
RV cannot be overloaded at will
The new standard adds the definition of a motorhome, that is, equipped with sleeping gear (converted from tables and chairs) and other necessary living facilities, and cars used for travel camping. At the official level, the car that is often said is recognized. At the same time, the new standard will determine the number of RV rides to prevent overloading. The new standard also requires that the motorhome should be equipped with a main power switch and a leakage protection facility; in addition to the starter, ignition circuit, battery and its charging circuit, other circuits should be equipped with circuit breakers, low-power appliances. Set up a utility circuit breaker.
Pure electric vehicle should start sounding warning
The new standard will be a new line of pure electric vehicles, plug-in hybrids and other new energy vehicles, and technical requirements for driving safety and driving performance. Among them, when the vehicle starts and the vehicle speed is lower than 20km/h, it should be able to give appropriate warning sound to the outsiders. When the vehicle is in a leak, the driver should be prompted by an obvious signaling device. At the same time, the vehicle should have the function of cutting off the power circuit to avoid secondary traffic accidents.
Mandatory standard reflective vest, electric window anti-pinch
Note that starting from January 1, 2018, in addition to the inspection triangle warning frame, the reflective vest will be inspected at the same time, the number is one, because this is required by the new standard. At the same time, electric car windows should have anti-pinch function, including electric windows. All passenger cars and special school buses are normally available when the vehicle is locked. When the child is forgotten in the car, you can tell the outside world by pressing the horn.
Three-point seat belts for all seats
In order to save costs, some passenger vehicles are only provided with a simple two-point seat belt in the middle of the rear row. In the new standard, this will not meet the requirements. A three-point seat belt must be provided in all positions of the passenger car.
At the same time, in order to make the driving process replayable and improve the traceability of traffic accidents, all passenger vehicles should be equipped with an event data recording system capable of recording data such as vehicle travel speed and braking state when a specific event such as a collision occurs. (EDR), or equipped with a vehicle-mounted video drive recording device that meets the standards.
Background news: About GB 7258
GB 7258 is an important part of the national safety technical standards for motor vehicles in China. It is the basic technical standard for the safety management of motor vehicles and the inspection of accident vehicles, such as registration inspection and in-service motor vehicle inspection, motor vehicle inspection, etc. One of the important technical basis for compulsory inspection of new cars, factory inspection of new cars and inspection of imported motor vehicles.