Metals, alloys and composite powders commonly used in thermal
spray hardfacing technology and coating service. These unique powders are
instantly heated by thermal spraying (welding) methods such as high temperature
flame or explosive flame, and are sprayed and deposited on the cold or hot
workpiece surface with high-speed heat flow in a molten or semi-melted state to
form a surface Reinforcing layer, in order to improve the wear resistance,
corrosion resistance, heat resistance, oxidation resistance or repair of
external dimensions of the workpiece surface. XTC produces WC, CrC, Oxide
Ceramic, Boride Powder, Metal Alloy Powder, Pure Metal and Spray Wire, etc.
product. For HVOF/HVAF/plasma/Flame spray coating and applications. Meet the
wear and corrosion resistance requirements of different surfaces.
WC, CrC oxide ceramic powder and boride
products are excellent in wear resistance and high temperature corrosion
resistance. Taking WC products as an example, the hardness can reach
HV1300-1500, and the temperature of CrC products can reach 800 degrees Celsius.
Metal alloy powder, Pure Metal and Spray
Wire products have more applications in glass mold, steel and machinery
industries. And XTC products are now become more and more popular in Metal
spray coating and thermal spray coating industry.
Coating Service,Metal Spray Coating,Flame Spray Coating,Thermal Spray Coating Luoyang Golden Egret Geotools Co., Ltd , https://www.lyshieldcutters.com
Technical Parameters:
Input power: three-phase four-wire AC380V
Output voltage and current:
1. Three-phase AC100V output (fixed value) A group of two, three-phase AC0–10A output (10A, adjustable value> group 3, AC voltage output three-phase AC0–400V, 220V, current is less than 10A, group 4, DC operating voltage output DC0-260V group 5, single-phase AC220V output (socket) two groups 6, three-phase AC380V output (fixed value, terminal) a group of 7, single-phase 24V, 36V, 110V, 220V DC fixed output Group 8, external dimensions: 550×570×1040mm
9, weight: 55kg
Operating instructions Take a test of a single-phase AC voltage meter as an example:
1. Connect input power AC380V
2. Check and confirm if the wiring is connected to the main power switch 3. Return the regulator to zero and press "switch on",
4. Then press the "switch on" switch on the panel to switch the operating voltage 5. Slowly adjust the output adjustment knob to raise the voltage to the required value and observe the voltmeter condition.
6. After the test is completed, press the “opening†twist of the AC operating voltage on the panel. Then, disconnect the main power switch:
1. Connect the “AC380V power input†to the three-phase four-wire network. Connect the ground wire to the earth network. Never connect the ground wire to the neutral wire or access the housing of other equipment. It will bring great danger to the subsequent test work. As we all know, if the equipment fails or the equipment shell is live, the operator will contact the live body as if it were connected to a 380V power grid. 
The use of high and low voltage switchgear electricity test bench
The high and low voltage switchgear power-on test bench is used for high and low voltage switchgear manufacturers to conduct various power test before leaving the factory for the high and low voltage switchgear produced. It can provide a variety of AC and DC power supply to facilitate the detection of switchgear and improve work efficiency.