(1) Active lifting function of the crane: If the driver reduces the torque applied to the steering wheel during turning, the torque on the rotating rod is also reduced accordingly. Then, as the steering force decreases, the steering angle and the steering speed decrease accordingly, and the rotation speed is correspondingly accurately detected. The control unit calculates the necessary return force required by the motor based on the steering force, vehicle speed, engine speed, steering angle, steering speed, and the curve stored in the control unit, and controls the operation of the motor to urge the wheels to return to the straight-ahead direction. The central location.
(2) Truck-mounted linear driving function: The straight-line driving function is an extension of the active returning function. When there is no moment acting on the steering wheel, the system will generate assistance to return the wheel to the center position. In order to realize the straight-line driving function, it is divided into two different situations: long-time rule and short-time rule.
Long time rule: Whenever there is a long distance from any side of the center position, the system will play a balancing role. Such as the use of tires in summer for winter use.
Short-term rule: The system will play a balancing role when the deviation from any side of the center position occurs in a short time. If you receive lateral wind.
When the truck crane receives a constant lateral force, the driver will give the steering wheel a torque to keep the vehicle running straight. At this time, the control unit calculates the necessary torque that the motor needs to provide to maintain the straight running state based on the steering force, the vehicle speed, the engine speed, the steering angle, the steering speed, and the graph stored in the control unit, and controls the motor operation to make the vehicle Return to the straight-line driving state to reduce the driver's work intensity.

Hubei Chu Sheng Special Vehicle

Contact: Manager Wang Tel.

Mould Insert

Preform Mould Spare Parts includes preform cavity, preform neck screw, preform core, slider, heating blockes and die set.

PET Preform Mould adopted DuPont chemical material, imported Germany Hotset, USA imported heating ring, Japan needle, brass graphite plate to ensure good lubrication effet etc.

Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about mould insert.

Preform Mould Spare Parts,Preform Core,Preform Caivty ,Preform Neck Screw

WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winibermachinery.com