two stage pelletizing system(sj120-120),This is mainly used for PP PE film and rigid or hard crushed material is also possible, it is specially designed for feeding squeezed material, waste dirty material after washed and dried.

Two stage machine with two screen changer, so that it can fliter much more impurity. Meanwhile the machine with one vacuum degassing and one natural degassing, then the final pellets will be more beautiful. The machine is with high performance and high efficiency, 

Screw is designed with differennt type for different, and the heater also can use Cost Aluminium, cost copper, alloy, keramic or others.

Side feeder with mixer, material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder
Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 300kg/h
4. Material come out more stably: material go through from the first stage to the second stage, with two screen changer, much more impurity will be filterd and the material come out from the die won't broken down.
5. Beautiful pellets: two degassing system, no air in the pellets.
6. The machine wih long life.

More machine photoes
Top force feeder(material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder)

The first stage of machine(After force feeder, the material will be send to the first stage, with extrusion and first screen changer, the material will go to the second stage) Materil come to the second stage directly

Material come out from the die( Normally we use 13,15,17,19,21 holes on the die)

See the whole line of the machine(top force feeder ----The first stage extruder----The first screen changer----Second stage extruder----Second screen changer----Die----Water tank----Pelletizer)

Gale dryer and pelletizer

Pameter of such kinds of machine

 

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468
                             

two stage pelletizing system(sj120-120),This is mainly used for PP PE film and rigid or hard crushed material is also possible, it is specially designed for feeding squeezed material, waste dirty material after washed and dried.

Two stage machine with two screen changer, so that it can fliter much more impurity. Meanwhile the machine with one vacuum degassing and one natural degassing, then the final pellets will be more beautiful. The machine is with high performance and high efficiency, 

Screw is designed with differennt type for different, and the heater also can use Cost Aluminium, cost copper, alloy, keramic or others.

Side feeder with mixer, material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder
Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 300kg/h
4. Material come out more stably: material go through from the first stage to the second stage, with two screen changer, much more impurity will be filterd and the material come out from the die won't broken down.
5. Beautiful pellets: two degassing system, no air in the pellets.
6. The machine wih long life.

More machine photoes
Top force feeder(material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder)

The first stage of machine(After force feeder, the material will be send to the first stage, with extrusion and first screen changer, the material will go to the second stage) Materil come to the second stage directly

Material come out from the die( Normally we use 13,15,17,19,21 holes on the die)

See the whole line of the machine(top force feeder ----The first stage extruder----The first screen changer----Second stage extruder----Second screen changer----Die----Water tank----Pelletizer)

Gale dryer and pelletizer

Pameter of such kinds of machine

 

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468
                             

Lithium-fluorocarbon(Li-(CFx)n) Cylindrical Battery

The cylindrical battery mainly includes models of 18650, 18500, 10440, 14500 and 32590, etc., which have the advantages of high capacity and wide operating temperature, the products can be used in remote control, camera, lighting, toy products, power tools, portable power sources and emergency equipment and other applications.

Shandong Zhongshan Photoelectric Materials Co., Ltd , https://www.zshcchem.com