Nowadays, many people have fewer opportunities to use a car after buying a car, and sometimes there is more than one car in the house. It is doomed that the car will be idle in one place when it is usually. But do you think it is a good thing for the car without a car for a long time? In fact, it is not that long-term use of the car will cause great harm to the car, especially if it is not prepared. The following small series tells everyone what to do when the idle car is to be prepared, and the precautions when the car is idle.

1. Tire aging tires are rubber products, so aging will occur when they are usually in normal condition. If the car is not in a good position or is not idle in maintenance, it will cause the tire to age and the inside of the tire will be easily oxidized. Especially when there is no garage, you need to stop outside. Generally, this situation will cause sunlight, which will accelerate the oxidation. And it can't be used with oil. If the car stops leaking for a long time, then its own tires can't be used.

2, gasoline, a shift of time is not used, you need to replace the oil, because the oil is out of lubrication or have other properties, generally a long time will reduce the anti-explosive properties of gasoline, generally its anti-knocking is inside the gasoline The content of octane number, so it will decrease with the increase of colloid content. Generally, the car can not make the temperature inside the car too high, otherwise it will be easy to wear parts.

3. When the car needs to be parked for a long time, be sure to prepare the car for anti-rust, and stop the car in a place that can be ventilated, put on the car, so as to prevent scratches. Many parts of a typical car are easily corroded, and they will always oxidize if they are left untreated for a long time, so be sure to prepare them for rust prevention.

4, the seat cushion on the car is prone to moisture and other phenomena, so these need to be often cool, give the car something to absorb moisture. Antifreeze is activated once a month, otherwise it is easy to deposit carbon. The battery must of course also be checked. In fact, when the car is parked for a long time, it is mainly to prepare the car for idleness.

What to do when the idle car is going to be prepared, the precautions when the car is idle will be finished for everyone. If the car is not used for a long time, let the family go out for a week, so that it is the tire for the engine or the car. It is all good. And when you need it for a long time after you have used it, you must make an inspection of your car, especially the tires of the car, the battery of the car, and the battery may be in a loss of electricity.

Asphalt Mixing Plant

Asphalt mixing plant is one of the key equipment for road construction. It is mainly used in the production of asphalt mixture for paving road surfaces. Asphalt mixing plant consists of a number of parts, including dosing system, dryer, agitator, dust removal system, fuel system and so on.

The batching system is one of the core parts of Asphalt mixing plant. It is responsible for adding various raw materials to the blender in a certain proportion. These raw materials include asphalt, sand, gravel and other additives. The batching system usually consists of a weighing sensor, a batching bucket and a batching transfer device.

The dryer is another important part of the Asphalt mixing plant. It is mainly used for drying raw materials such as sand and stones. There are heating elements and rotating agitators inside the dryer, which can make the raw materials fully heated and mixed evenly.

Mixer is one of the core parts of Asphalt mixing station. It is responsible for mixing various raw materials together to produce a high quality asphalt mixture. The agitator usually consists of multiple mixing blades, which can fully mix the raw materials to ensure the stable quality of the asphalt mixture produced.

Dust removal system is one of the important components of Asphalt mixing plant. It is mainly used to collect dust and exhaust gases generated during the production process. The dust removal system is usually composed of multiple filters, which can effectively filter out dust and exhaust gas to ensure a clean working environment and air quality.

Fuel system is one of the key parts of Asphalt mixing plant. It is responsible for providing the fuel to power the Asphalt mixing plant. The fuel system usually consists of a fuel pump, a fuel filter and a fuel injector.

Asphalt mixing plant is a kind of high efficiency asphalt mixture production equipment, widely used in road construction field. It has the advantages of high automation, high production efficiency, stable product quality and so on, and provides a strong support and guarantee for road construction.

Asphalt Mixing Plant,Mixer Plant,Asphalt Mixing Bitumen Equipment,Asphalt Paving Equipment

BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockplant.com