As of April this year, Yunnei DEV series D25 engine equipped with JAC new Chunling models has reached more than 5,000 vehicles, since the listing of the car has increased rapidly since the listing, welcomed by users, equipped with the Yunnei D25 engine is based on "long The outstanding features such as long life, low fuel consumption, low noise, cost-saving, and strong adaptability are well received. Mr. Ou, who is engaged in logistics transportation in Guangzhou, purchased a JAC new Chunlin light truck equipped with a Yunan D25 engine. Let's take a look at the performance of this new Bell equipped with a diesel core in the cloud.

Master Ou and the car with Yunnei Power

Master Ou drove for more than 10 years. He had previously opened 8x4 coal carts in Hunan. Due to the influence of national policies, the number of mines in the local area has been continuously reduced. Master Ou was able to make a living in Guangzhou under the guidance of his cousin. His new Jun Bell has been on the road for less than a month.

Due to the fact that he had not been in contact with a light truck before, Mr. Ou learned the experience of buying a car from a fellow villager when buying a car. He said that he had bought a Bell from a fellow dealer in Guangzhou and he felt good in all aspects. After comparing the prices of the various Bells and listening to the sales staff's introduction, he finally set the cloud. The new Bell of the DEV series D25 power.

The Yundu D25TCID1 engine has a maximum output of 140 hp and a maximum torque of 360N.m. The new six-speed transmission is matched with ABS anti-lock braking system and front axle disc brake. According to sales personnel from local distributors, more than 100 Bells were sold in the first three months of the year, most of which were new Bells. . The car's bare car price is 90,000.

Equipped with the Bell of the DEV engine in the cloud

In appearance, the new Bell of the European Master added a “waist line” on the basis of the old Bell, which clearly divided the upper and lower parts of the car. Rearview mirrors also follow the trend from the old models of external mirrors to door mirrors, both sides have adopted a large orientation mirror and wide-angle lens double-mirror configuration, and is equipped with front and side ground mirror to ensure traffic safety. The headlights also changed, turning the lights out and moved upwards, adding daytime running lights.

Masters often pull goods logistics park

Master's new car started on March 30. It usually takes delivery in the eight-party logistics park in Guangzhou Ishii, and runs short-to-medium logistics in Guangzhou and surrounding cities. Since the new car has been on the road, it has been operating smoothly. The goods are available every day, but the freight rate is relatively low. His car usually runs one to two times a day. Every time he pulls 5-6 tons, in order to reduce the toll, the high speed is basically not taken.

In heavy-vehicle transportation, because the masters often take the national road, the speed of the vehicle is generally maintained at 70-80km/h, and the engine speed is maintained between 1500-2000. Smaller slope 6 stalls can be directly over, slightly larger slope, the feeling of speed down the car into 5 files, the general road conditions, the master of the EU are basically switching between these two stalls. The master chef has already ran 3210 kilometers so far. The fuel cost is 2,100 yuan, and the fuel consumption per kilometer is about 0.65 yuan. The fuel economy effect is self-evident.

Cloud DEV Engine

After more than a month's sports car pulling, according to the response of the European Master, the new Junling light truck is more comfortable and convenient to use and control, and the Yunnei D25 engine equipped with it has low noise, low fuel consumption and satisfactory cargo capacity. For the first time, the use of a cloud-equipped engine provided him with a certain level of trust in Yunnei's engines and a sense of prudence in his daily driving.

Building Hardware

Building Hardware,Construction Hardware,Construction Hardware Castings,Investment Casting

DONGYING SHENGYU METAL PRODUCT CO.,LTD , https://www.shengyuaccessories.com