Air Valve double chamber:
1.
Application: water transition pipes
2.
Function:
a. when the pipe is
being filled with water, the air valve automatically let air out of the empty
pipes. The air must be released rapidly
to make sure that the pressure does not increase in that area as flow is
restricted by the air in the pipe.
b. when the pipe is being
empty, the air valve must let air into the pipes rapidly to prevent the
pressure from dropping and forming a vacuum in the pipe.
c. automatically remove
the air bubbles forms at the high points of the pipes or move through the pipes
to prevent them reduce the water flow through the valves.
3.
Surface coating:
Internally and externally coated with
fusion bonding epoxy coating of minimum thickness of 250um. As required,
Certification corresponding to drinking water like KTW, WRAS could be
available.
4
Quality traceability
All the valves are with serial no. which
could ensure the traceability of the production and quality control.
Air Valve Double Chamber,Double Canisters Exhaust Valve,Double Orifice Air Valve,Double Type Air Valve SUZHOU YUEDA VALVE CO., LTD. , https://www.jsyuedavalve.com
The engine is the most environmentally influential part of all construction machinery systems. All three new products use the internationally renowned American Cummins engine. The advanced EFI engines use a high pressure common rail fuel system to generate high injection pressure (1600 bar). In order to improve the performance and fuel efficiency at various speeds, compared with the traditional non-electro-injection engine, the power can be increased by 5%-10%, the effective fuel consumption rate is reduced by 5%-15%, and the emission of harmful gases can be reduced. About 20%, its emission requirements meet the third-stage European emission standards. It has outstanding advantages in fuel efficiency, power and economy. The environmentally-friendly water-cooled supercharged diesel engine with low fuel consumption, low emission, low noise and high efficiency greatly reduces environmental pollution.
The EFI device in the EFI engine is composed of three parts: the injection oil circuit, the sensor group and the electronic control Module (ECM). The core component is the ECM electronic control module. How to realize the data output exchange between the ECM of the EFI engine and the electrical control system of the whole machine has always been a difficult problem in the development process. The technician of the company successfully realized the problem of the conversion of the throttle control command and the engine ECM command by changing the control mode of the main controller. However, since the ECM in the EFI engine is composed of sophisticated electronic components, it is required to have high-performance electromagnetic compatibility of the electrical components, which makes it difficult to design and select the work. Xu Di company's technicians overcome these difficulties and will be in the electrical control system
Xu digging three independent research and development new products successfully trial-produced
Recently, three new products, XCG215LC-8, XCG260LC-8 and XCG360LC-8, independently developed by Xu Di, have been successfully trial-produced.