Bulk feed truck, Bulk feed trucks, also known as bulk grain truck, Bulk corn truck,feed truck, Silo feed truck, Bulk Grain Carrier used to transport grains like corn, soy and concentrate for Animals Simple structure, reliable performance, easy to transport a large amount of control, maneuverability strong, non-polluting materials, which is widely used in feed for farmed transport major small and medium enterprises.
Bulk feed car Introduction
Mainly used for transporting bulk finished feed or feed produced from raw grain to livestock farms feed mills, poultry farms and feed processing user, but it can also be used to transport of certain non-corrosive powder granular materials, such as pharmaceutical powder and grain turnover .
Bulk feed feed tank car set up on the chassis of the truck, special facilities by the tank assembly, conveyor systems (horizontal discharge systems, vertical discharge system and the activities of the discharge system components), bulk feed tank cars hydraulic system (high-pressure pump the three output terminals via a line connecting the dispensing valve and the valve angle of the hydraulic motor, respectively, as well as lift cylinder series with horizontal discharge, vertical discharge, the discharge of the hydraulic motor activity), bulk feed tank cars electric systems, pneumatic warehouse mechanism and other components. At the bottom of the tank with a gate in the gate below the horizontal screw conveyor equipped (commonly known as horizontal stirring cage), is driven by the power take off from the auto gearbox output power, and then drive high pressure pump to drive the hydraulic system, hydraulic bulk feed tank cars motor gear driven by the level of the auger blade shaft and blade rotation, the activities of the delivery system (commonly known as activity stir cage) to feed output. Flat roof facing a discharge auger activity rotatably and lifting, transportation spiral lying in the top of the tank top; when unloading the lift, car bulk feed tank pipe end of the discharge port and livestock feed farm gate contact holding tank at the top of the alignment, complete discharge.
Bulk feed car Features
1 .. bulk transport of feed ratio packed into bags of transport not only labor-saving, and low cost.
2. Bulk feed tank body sealed in transport, reduce losses, quality assurance, to avoid contamination.
3. Automatic feeding on discharge, continuous operation, greatly improving production efficiency.
4. The sub-positions can be installed inside the tank, which can transport a variety of different types of feed or expanded media.
5. The standardization of components, easy maintenance.
Tank dimensions (L * W * H) and the corresponding volume of correspondence
Corresponds to the effective tank volume (m3) and the corresponding body size
Number of sub-tank positions 1-5 (with storage bodies, which can transport multiple types
The average discharge rate (kg / min) 510 (different drive forms will change accordingly)
Activities unloading system rotation angle of 180 degrees
Activities unloading system maximum elevation angle of 60 degrees
Transmission distance of maximum distance (m) 7.2
The maximum vertical distance (m) 8.2
Residual rate 0.01
Bulk feed Cars Category
Bulk feed car type vehicle and a separate tank (available appropriate trucks transport) and the like. Divided by driving form: electric discharge bulk feed truck, full hydraulic unloading bulk feed gas car unloading bulk feed car.
Bulk feed hydraulic car
Hydraulic feed bulk feed tank car set up on the chassis of the truck, special facilities by the tank assembly, conveyor systems (horizontal discharge systems, vertical discharge system and the activities of the discharge system components), the hydraulic system (high-pressure pump via a line three output terminals connected to the valve and dispensing valve are the corner of the hydraulic motor, and a horizontal lift cylinder discharge, vertical discharge, the discharge of the hydraulic motor activity), electric system, pneumatic storage bodies in series with the other components. At the bottom of the tank with a gate in the gate below the horizontal screw conveyor equipped (commonly known as horizontal stirring cage), is driven by the power take off from the auto gearbox output power, and then drive high pressure pump to drive the hydraulic system, the hydraulic motor via a transmission driven horizontal screw conveyor blade shaft and blade rotation, the activities of the delivery system (commonly known as activity stir cage) to feed output. Flat roof facing a discharge auger activity rotatably and lifting, transportation, spiral lying in the top of the tank top; when unloading the lift, the tube end of the discharge port and storage of livestock and poultry farms feed door contact tank top, aligned to complete discharge.
Unloading bulk feed gas car
Unloading of bulk feed gas car vehicle using a large flow of gas delivery technology, with low pressure, high flow, low noise, high output, transmission distance, discharge speed, low residual amount of material pollution. Widely used in various types of enterprises farming, feed processing enterprises feed transport, solve the problem of long-distance transmission can be realized without entering a vehicle that is able to complete the feeding step of feeding the tower, put an end to farm vehicles approach the most headaches prevention issues.
Auger bulk feed electric car
Electric auger bulk feed truck for different customers the latest development, new products to meet the low-end market, the car unworthy board generator, electric auger to use three-phase 380V mains supply, the wheels can adapt from the small rural country road. The car is very popular customers cost-effective for small road small farms, feed mills. Mechanical screw discharge mode, discharge speed, continuous operation, greatly improving production efficiency. It can be divided into two to four tank compartment while loading different feeds; simple components structure, convenient and flexible operation, easy maintenance.
Bulk Feed Truck Bulk Feed Truck,Bulk Feed Trailers,Feed Mixer Truck,Bulk Feed Discharge Truck CLW GROUP TRUCK , http://www.clwgrouptruck.net
Model year: 2015
Engine: WD615.44 diesel engine, turbocharged, intercooled, 6-cylinder, 330HP/2200rpm, 1250N. M/1400rpm, (STEYR technology)
Gearbox: FAST 9JS135 9-speed manual (Fuller technology)
Steering case: CQ8111 (ZF technology)
Overall size: 9200(L)X2500(W)X3950(H) mm
Wheelbase: 3825+1350 mm
Curb vehicle weight: 12850 kg
Gross vehicle weight: 25000 kg
Payload: 11955 kg
Seating capacity: 3 persons
Drum geometric capacity: 15.98 M3
Drum nominal capacity: 9.7 M3
Fuel tank: 350 L
Water tank volume: 300 L
Max. Vehicle speed: > 85 km/h
Tires: 11.00R20(Steel wire)
Brake: Air brake + exhaust brake
STANDARD FEATURES:
A/C, power steering, cab-tilt mechanism with hydraulic assist, tilt steering wheel, AM/FM stereo cassette player, digital clock, power windows, rear window curtains, openable front grille.
OPTIONAL FEATURES:
Metallic paint, ABS (WABCO), etc.
More pictures:
6X4 Transit Mixer
Model year: 2015
Engine: WD615.44 diesel engine, turbocharged, intercooled, 6-cylinder, 330HP/2200rpm, 1250N. M/1400rpm, (STEYR technology)
Gearbox: FAST 9JS135 9-speed manual (Fuller technology)
Steering case: CQ8111 (ZF technology)
Overall size: 9200(L)X2500(W)X3950(H) mm
Wheelbase: 3825+1350 mm
Curb vehicle weight: 12850 kg
Gross vehicle weight: 25000 kg
Payload: 11955 kg
Seating capacity: 3 persons
Drum geometric capacity: 15.98 M3
Drum nominal capacity: 9.7 M3
Fuel tank: 350 L
Water tank volume: 300 L
Max. Vehicle speed: > 85 km/h
Tires: 11.00R20(Steel wire)
Brake: Air brake + exhaust brake
STANDARD FEATURES:
A/C, power steering, cab-tilt mechanism with hydraulic assist, tilt steering wheel, AM/FM stereo cassette player, digital clock, power windows, rear window curtains, openable front grille.
OPTIONAL FEATURES:
Metallic paint, ABS (WABCO), etc.
More pictures:
Bulk Feed Truck
6X4 Transit Mixer, Truck, Mixing
Model NO.: 5253GJBTMG384
Drive Mode: 6x4
Maximum Horsepower: 300-400hp
Condition: New
Power: Diesel
Truck Type: Tractor Truck
Tire Design: Radial
Seats: ≤5
Tire Certification: ISO
Tire Type: Inner Tube
Transport Package: By RO-RO vessel
Specification: CCC
Origin: China
HS Code: 87042240
Model NO.: 5253GJBTMG384
Drive Mode: 6x4
Maximum Horsepower: 300-400hp
Condition: New
Power: Diesel
Truck Type: Tractor Truck
Tire Design: Radial
Seats: ≤5
Tire Certification: ISO
Tire Type: Inner Tube
Transport Package: By RO-RO vessel
Specification: CCC
Origin: China
HS Code: 87042240
6X4 Transit Mixer