Steering system and brake system to operate the car's system. The first two systems can only make the car go, but the car we want should be an obedient tool. With the two systems of steering system and brake system, the driver can control the chassis part and match the engine. In fact, a car can run. Then look back at the four terms the article started with. Suspension (note that the word is not hung) refers to a system connected between the girder and the axle. It contains shock absorbers and also has the necessary support bars to ensure the stability of the chassis. The axle is obviously responsible for the weight, so it should be part of the driving system. The axle, generally speaking, is a half axle, which is connected to the axle of the wheel and is responsible for driving the wheel, so it is part of the drive train. But in many places, axles and axles, and sometimes even suspensions, are all talking about the same part, which is easy to mislead. For example, in the past two years, the "off-axis door" incident of a certain brand of cars meant that people who did not understand thought that the axles were broken, but in fact the rear suspension was the fault. â— Postscript: See here you may say: a few words to explain it clearly so I have to say so much. That's right. You can understand what the two terms mean by looking at the last two paragraphs alone. But if you can spend some time, look at this article and compare your chassis with the structure of your own car. If you are using a car, keeping a car, or repairing a car, you will be as organized as the Kenting solution.
Left-hand full-thread bolt
Left-handed full-thread bolts are mainly used in mines where rock formations such as coal mines are not hard enough. bolts are generally used together with anchoring agents to achieve end anchoring or full anchoring in mines.
ANTO left-handed full-thread bolt is made of high-strength HRB500 or HRB600, which can provide high load-bearing capacity to protect mine safety.
Compared with other bolts, it can be installed using ordinary foreign drilling rigs, which saves installation costs.
Anto left-handed full-threaded anchor rod, the threads are distributed throughout the rod body, increasing the moving length of the nut, if the anchor rod support is loose in the later stage, tighten the nut, and the anchor rod restores the support force.
The one-way left-handed rebar bolt without longitudinal reinforcement can be used in all kinds of mines and underground projects, and is especially suitable for the support of coal tunnels with wire mesh. It has achieved good technical and economic effects.
The structural features of the anchor rod: the full length of the body has a rolled continuous thread, and the full length is of equal strength; the fastening end is provided with a prestressed gasket and a ball nut. It is superior to the bolt processed by round steel, and is a new type of bolt with material saving, labor saving and equal strength.
20mm Threaded Steel Rock Bolt,Rebar Rock Bolt,Mining Rebar Bolt,Coal Mine Supporting Anchor ANTO MINING EQUIPMENT CO.,LTD , https://www.antobolts.com
How to distinguish vehicle parts: car sedan and axle