The chiller is a cooling water equipment that can provide constant temperature, constant flow and constant pressure. The industrial water chiller can always output ice water that is lower than the ambient temperature. It can be used wherever cooling is needed, either directly or indirectly. The chiller can be used to cool the injection mold and improve the quality of plastic products; Vacuum coating cooling, control the temperature of vacuum coating machine; Food industry cooling, rapid cooling processing; Chemical industry, effectively control the temperature of chemicals; Building cooling, rapid cooling and condensation of concrete, etc. Water chillers are widely used. Cooling Mold Chiller,Injection Molding Chiller,Chiller Used In Injection Molding,Cooling Mold Chiller Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com
In 2008, the entire automobile market fell into an ice age. Almost all the car makers suffered serious losses. However, the commercial vehicle brand Mitsubishi FUSO (Fisang) grew in a contrarian fashion. Not only did the recession decrease, but the total sales volume also increased slightly compared to 2007, and it was nearly 200,000. Achievements set a new record. 
In terms of market areas, Southeast Asia sold a total of 56,058 vehicles, an increase of 41.5 percent, of which Indonesia recorded the highest growth rate with 57.8 percent and 46,968 sales, while the Middle East increased by 8.8 tons and the highest record for Mitsubishi FUSO in the market was 34,675. , Africa also increased by 15.6 to 16.331, while the fierce competition in Europe more than 9.6? slightly increased sales and sales of 20,757 vehicles, while Central and South America, a substantial increase of 21.8? 10966 to break the 2007 performance.
Although Mitsubishi FUSO has grown in all parts of the world, it has been affected by the economic downturn by 22.1 percent in Japan, with only 4,220,260 cars. Fortunately, sales in other markets are sufficient to support Japan, or it should show negative growth. For Mitsubishi FUSO in 2008, it was also the fifth consecutive year since 2003. Therefore, in 2009, when many governments have invested in expanding domestic demand, Mitsubishi FUSO is bound to have an alarming increase.
Water chillers can be divided into industrial water chiller, screw water chiller, electroplating water chiller, oxidation water chiller, laser water chiller, coating water chiller, wave soldering water chiller, reflow soldering water chiller, exposure machine water chiller, developer water chiller, ultrasonic water chiller, extruder water chiller, high-frequency quenching water chiller, Injection Molding Machine water chiller, electrophoresis paint water chiller Pharmaceutical special water chiller, food special water chiller, stainless steel water chiller, circuit board water chiller, plastic suction machine special water chiller, chemical water chiller, coating water chiller. According to working conditions, it can also be divided into air-cooled water chiller, water-cooled water chiller, low-temperature water chiller, thermostatic water chiller, etc
Energy saving function of water chiller:
The water chiller is a kind of refrigeration equipment that cools water and recycles it. The cooling water temperature can be adjusted automatically according to the requirements, almost without water consumption. Long-term use can save a lot of water. Therefore, compared with the mode of using tap water discharge to cool the equipment, the industrial water chiller is an ideal equipment that can quickly achieve the desired cooling effect and save energy.
About the function of the chiller, I will introduce it here today. Chillers play an important role in industrial production. Enterprises use chillers to improve production efficiency, ensure product quality and increase profits.
1. Regularly check whether the voltage and electric flow of the water-cooled chiller are stable, and whether the compressor operates normally. If it is a semi-closed compressor, regularly check the oil volume, which should be more than 2/3 of the window. When the water-cooled chiller works normally, the voltage is 380V and the current is within the range of 11A-15A.
2. Regularly check whether the refrigerant of the water-cooled water chiller has leakage: it can be determined by referring to the parameters displayed on the high and low pressure gauge on the front panel of the host. According to the temperature change of air temperature (winter and summer), the pressure display of the water chiller is also different. When the water chiller works normally, the high pressure display is 11-17kg, and the low pressure display is 3.5kg-5kg, which are normal.
3. Check whether the cooling water system of the water-cooled water chiller is normal, whether the fan and sprinkling shaft of the cooling water tower are in good operation, and whether the make-up water of the built-in water tank of the water-cooled water chiller is normal. The water-cooled chiller should be replaced with new water once every three months. If it cannot be replaced, please add rust remover.
4. All industrial water chillers should be cleaned once a year when they are used for six months. The main cleaning parts include cooling water tower, cooling water pipe and condenser to ensure better cooling effect.
5. When the water-cooled chiller is not used for a long time, the circuit switches such as the main power supply of the water pump, compressor and Cooling Tower should be turned off in time. The water-cooled water chiller needs to be connected with the cooling water tower and the circulating water pump to achieve the cooling effect. In order to ensure the quality of the circulating water, it can be considered to install a Y-type filter at the water source and add algaecide and scale remover to the cooling water tower to prevent impurities from entering the pipeline and affecting the operation of the unit.
Mitsubishi FUSO Fushun Commercial Vehicle Sales in 2008 reached new heights!