Mold Temperature Controller Unit for Die Casting Industry
Posted on

Model NO.: MPDC/M
Control Mode: P.I.D. Microprocessor
Temp. Working Range: +45 to 320 Degree
Temp. Control Accuracy: Within +/- 0.1 Degree
Heating Type: Circulating Heating
Cooling Method: Indirect Cooling
Guarantee Period: 15 Months
Lifetime: More Than 5 Years
Application: Die Casting Industries
Trademark: MAIPT
Transport Package: Wooden Case as Usual
Specification: 1350*500*1150
Origin: China
HS Code: 8419899090
320ºC Oil Running Type Mold Temperature Control Units Special for Die Casting Industry

 
 BRIEF DESCRIPTION WWW.MAIPT.LTD/
 
Mold Temperature Control Units(TCU) PID process controller are used to preheat a process to the desired operating temperature by engaging the unit's electric immersion heater and recirculating the oil in the system. Oil type TCU circulate high temperature heat transfer fluid through the process application for temperature control.

MPDC/MPDM series Heat Transfer Oil type TCU are specially engineered for the temperature control in die casting industry.
 
According to the temperature difference of stationary mold and movable mold, it has two methods of temperature control for selection: one is single-circuit and the other is dual-circuits. Both of them can provide the temperature range from 45°C to 320 °C, customized heating capacity and voltages are available.

Mold Temperature Controller Unit for Die Casting Industry
 
 FEATURES / FUNCTIONS / SAFETY PROTECTIONS WWW.MAIPT.LTD/
 
  BASIC FUNCTIONS * OPTIONAL FUNCTIONS
- Thermometer for return oil   * Control mode: PLC
- Switchover of heating power   * Explosion-proof device
- Automatic air-exhausting after startup   * Delay cooling after shutdown
- Control mode: Microcomputer control   * RS485 remote control function
- BY-PASS pressure release loop for hot oil   * Air-blowing and return oil function
- Isolated electric cabinet for long service life   * Negative-pressure system running
- SUS integrated pipelines for less pipe resistance   * Customizable multi-point Temperature unit
- System pressure & Functional test before shipping   * Customizable horse power and heating power for oil pump
  SAFETY PROTECTIONS                                                   
  Temperature anomaly                                    →  Alarm and cut off power, when cycle-oil's Temp. exceed upper limit.
  Power reverse                                              →  Power supply phase detection to prevent pump reverse, alarm indication.
  Pump overload →  Thermal overload relay protect pump from overloading, alarm indication.
  Low oil protection →  Level-switch detects the oil level, prevent low oil and alarm indication.
  Pressure anomaly →  Automatic stop heating operation when system pressure anomaly.
  Anomaly heating →  Heating contactor working, and anomaly heating alarm indication.
  Pipe blockage →  BY-PASS pressure release loop to protect pump.
  Air exhaust Function →  Automatic air-exhausting after startup.
  Short circuit →  Air-break switch - releasing.
 
 DETAILS SHOW WWW.MAIPT.LTD/

Mold Temperature Controller Unit for Die Casting Industry
 
 TECHNICAL SPECIFICATION WWW.MAIPT.LTD/

 Parameter Tables For MPDC/MPDM Series
Model Heating Capacity Pump Data Pipe Connecting Approx. Dimention
Power Flow Lift Inlet Outlet Weight L*W*H
KW BTU/Hr KW L/min m DN DN KG mm
MPDC-18 9*2 61,434 0.5 35 60 15 15 170 1150*420*1000
MPDC-36 15*2 102,390 1.1 60 60 20 20 200 1250*420*1000
MPDC-48 20*2 136,520 2.8 100 80 25 25 225 1350*500*1150
MPDM-18 18+18 122,868 0.55*2 30 50 15*2 15*2 300 1250*550*1150
MPDM-36 30+30 204,780 1.1*2 60 60 20*2 20*2 340 1250*550*1150
MPDM-48 40+40 273,040 2.8*2 100 80 25*2 25*2 380 1335*600*1350
Remark: 1. Above specifications just for reference, we reserve the right to change specifications without notice.
2. Above items are only a part of ours, customization for special specifications is also acceptable. 
3. Three types of contactor output optional: Physical contactor, Solid State Contactor, SCR Contactor.               
 
Specification Details (e.g. MPDC-18)
No. Part Name Specification Technical Data
1   Power Supply 3N-380-50HZ
2   Hot Medium Oil
3   Control Mode PC board Self-optimized microprocessor
4   Temp. Control Accuracy  PID±1ºC
5   Temp. Control Range  Inlet-Oil Temp. ( +45ºC~320ºC )
6   Heating Power 18KW ( 9KW+9KW ) Adjustable
7   Heat Exchange Area 0.36M2
8   Heating Method Direct heating ( Indirect cooling )
9 Pump  Model TOE/NPY2251
10 Power Consumption 0.55KW
11 Delivery Lift 20M
12 Flow Rate 20L/Min
13 Pipeline Diameter Hot Medium Inlet/Outlet DN15 (Adjustable, no more than DN20) 
14 Cooling Water Inlet/Outlet DN15
15 Drain Oil Port DN15
16 Temperature
Controller		 Model P6100 (Accuracy PID±1ºC)
17 Modulating Action Dual PID control of heating and cooling
18 Temp. Interaction Stick K- thermocouple
19 Display State Respectively display setpoint & real point
20 Output Select SSR output
21 Heat Transfer Oil Volume ( Inside Pipeline ) Approx.10L
22 Special Function Oil Return Return oil back suction of oil pump
23 Machine Frame Size L x W x H 1350*500*1150mm ( Exclude the casters )
24 Expension Tank Volume 40L
25 Total Weight N.W. Approx.170KG

Configuration Table (e.g. MPDC-18)
No. Part Name Brand Name Place Of Origin
1 Temp. Controller WEST UK
2 Overheat Controller MAIPT (OEM) China
3 Heating Tube MAIPT (OEM) China
4 Heat Exchanger MAIPT (OEM) China
5 Temp. interaction
stick		 MINGYANG TaiWan
6 Air-Break Switch FUJI Japan
7 Heating Contactor SIEMENS Germany 
8 Pump Contactor SIEMENS Germany 
9 Pump Overload Relay SIEMENS Germany 
10 Anti-Phase Relay CARENS Switzerland
11 Microcomputer
Control Panel		 MAIPT China
12 Check Valve AMICO China
60 M3/h Concrete Batching Plants

China Hzs60 Concrete Batching Plant Machine,Concrete Batching Plant Hzs60,Wet Mix Concrete Batching Plant,Hzs60 Ready-Mixed Concrete Batching Plant, we offered that you can trust. Welcome to do business with us.This product(concrete batching plant) is a fully automatic concrete mixing equipment consisting of five systems of mixing, electrical control, storage, conveying and weighing.This product(concrete batching plant)mainly consists of 5 major systems such as mixer, material weighing system, material conveying system, material storage system and control system and other ancillary facilities.
Features of concrete batching plant:
1.It adopts combined structure and unitized module, which is very convenient for installation and demolition
2.High performance twin-shaft, good mixing quality and high efficiency
3.Increase the unloading angle of the aggregate bin to solve the problem of unloading difficulties caused by rain
It is assembled by building blocks, which is short, quick and convenient.
4.It is convenient and quick to use the cylinder discharge or electric push rod to discharge.
5.A variety of mixing processes, highly automated, high production efficiency,
6.Environmental protection and energy saving, using pulse dust removal, recycling waste-water for reuse


Hzs60 Concrete Batching Plant Machine,Concrete Batching Plant Hzs60,Wet Mix Concrete Batching Plant,Hzs60 Ready-Mixed Concrete Batching Plant

Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.zeyumixer.com