Ridge Cap Roll Forming Machine with Wall Panel Structure
Posted on

Model NO.: YX128-345
Customized: Customized
Advantage: Easy to Maintenance
Condition: New
Product Name: Ridge Cap Roll Forming Machine
Steel Thickness: 0.3-0.8mm
Decoiler: Manual or Hydraulic
Trademark: SAIBO
Transport Package: Sea Packing
Origin: Jiangsu, China
HS Code: 84552210
Cap ridge roll forming machine

Specification of the material
1 Suitable Material Colored Steel plate, Galvanized steel, G550
2 Width of the raw material 457mm
3 Thickness 0.3-0.6mm

Profile drawing:
Ridge Cap Roll Forming Machine with Wall Panel Structure

 The Chart of Process Flow
Ridge Cap Roll Forming Machine with Wall Panel Structure

Specification of Components
No   Technical Specification & Remark
1 Manual Uncoiler
Ridge Cap Roll Forming Machine with Wall Panel Structure
  •  
  • Width of feeding: 350mm
  • Capability: 3 Ton
  • Bound of expand &fight: 380mm-520mm
  • Mode of expand &fight: inner expand &fight by manual
  • Way of feeding: manual
  •  
2 Main Roll Forming Machine
Ridge Cap Roll Forming Machine with Wall Panel Structure
  • Roller stations:7stations + 4 station of side roller
  • Roller material:ASTM1045 chrome plated surface with chrome
  • Shaft diameter: ¢65mm material: SAE1045 with tempering
  • Main power: 5.5kw
  • Machine structure: wall panel
  • To avoid accidents, the machine will be covered with the mobile protective mesh
  • Adopt the pre-cutter in order to save the coil
  • Adopt the film device in order to protect the coil
3 Hydraulic cutting & pressing system
Ridge Cap Roll Forming Machine with Wall Panel Structure
  • Cutting & pressing after forming: Cut the sheet after roll forming to required length
  • Uses two hydraulic cylinders for operation.
  • Material of blade/pressing mould:Cr12, 58-62 HRC hardness
  • Power by hydraulic,5.5KW
  • Tolerance of length: +/- 1.5mm for each piece end product
4 Auto stacker
Ridge Cap Roll Forming Machine with Wall Panel Structure
  • Max stacking length :4m
  • Power: by air cylinder
  • Max stacking thickness:500mm

Minning Drilling Machine

Fully Hydraulic Jumbo Drilling Rig Underground tunneling mining drilling rig machine

1.Rugged and reliable

2.Powerful engine,low oil consumption
3. Safe,roof ROPS and FOPS approved
4. Heavy duty and verrsatile boom means direct,fast and accurate positioning
5.Feed rotation unit with 360 degrees rollover and 360 degrees rotation,could drill side doors and bolting holes
6.High performance with reliable hydraulic control system,ergonomically designed operator environment,good visibility and hand reach servicability on the panel
7.Heavy feed and rotation rock drill designed for any face condition
8. Operation friendly for easy drilling and tramming
9.Main application:
9.1.Hard rock blasting holes drilling
9.2.Tunnelling
9.3. Mining
9.4.Hydropower projects
9.5.Compact hydraulic station
9.6.The radiator for drilling machine can reduce the oil temperature efficiently to avoid hydraulic 9.7oil from changing to low viscosity or destroyed because of the very high temperature of oil.
9.8.The electric control box can protect the electric motor to operate safely.

Tunnel Drilling Machine,Channel Tunnel Drill,Tunnel Boring Drill,Channel Tunnel Drilling Machine

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com