Stainless steel gear pumps, also known as sanitary pumps, are mainly used in the food industry.

The stainless steel gear pump is a horizontal rotary pump and mainly includes a pump body, a gear, a bearing seat, a safety valve, a bearing, and a sealing device and the like.

The stainless steel gear pump is equipped with a safety valve. When the gear pump or discharge pipe fails or mistakenly closes the discharge valve to generate a high pressure and high pressure, the safety valve will be gray cast iron from the pump body, bearing seat, etc. Plain steel production, but also according to the special needs of users to use copper or stainless steel material bearing box on the packing room, play an axial sealing effect. KCB series gear pumps adopt mechanical dense devices and the bearings adopt single row radial ball bearings. KCB—18.3～83.3 pumps are composed of three oil resistant rubber rings and a retaining ring in the intermediate lining. Adjust the degree of sealing by adjusting the two nuts on the compression cover. The bearing adopts copper-based powder oil bearing. In addition, stainless steel gear pumps can be filled with flexible graphite with flexible, high temperature and low temperature, chemically stable and self-lubricating flexible graphite as filler.

Moving open, remove some or all of the high-pressure liquid back to the low-pressure chamber, thereby protecting the gear pump and the pipeline.

The flexible coupling is directly connected with the drive motor and installed on the common cast iron chassis.