On September 16, 2015, the first meeting of the Eighth National Power Capacitor Standardization Technical Committee was held in Ningbo. A total of 80 members from manufacturing enterprises, research institutes and operation departments (or committee members), observers and standard revision working groups from power capacitors and their application industries all over the country attended the meeting. Among them, the committee members (or committee members Representative) 38 people.

The meeting was presided over by the chairman of the Board of Directors Renaissance, vice chairman Ni Xuefeng presided over.

China Electric Industrial Association fruit rock engineers attended the meeting and made a speech. He introduced the latest direction of reform and specific measures for the standardization of electrotechnical industry in the three aspects of compulsory standard reform, the development of group standard and the optimization management of the standard committee, etc. Meanwhile, he also hoped to see the construction of the national power capacitor standard committee as well as the standard Committee members made their demands, and they hope that members will actively perform their duties and devote more enthusiasm and make contributions to the commonweal cause of standardization.

Zhu Yiyuan, general manager of Ningbo Xinrong Electric Technology Co., Ltd., a co-organizer of the conference, extended a warm welcome to the leaders and representatives attending the meeting and briefly introduced the development history and production of Ningbo Xinrong Electric Appliance Co., Ltd. Fruit rock engineers read the "National Standards Office office on the National Power Capacitors Standardization Technical Committee General Assembly and the approval of the program." The Eighth National Power Capacitor Standardization Technical Committee (SAC / TC 45) is composed of 39 members. Yuan Fuxing serves as chairman and Li Qin, Ni Xuefeng, Li Guofu and Liu Shui-ping hold the positions of vice chairman and He Kengchao as members and secretaries Located in Xi'an Institute of high voltage electrical appliances limited liability company.

The meeting reviewed the "National Power Capacitor Standardization Technical Committee Draft (Draft)" and "National Power Capacitor Standardization Technical Committee Secretariat Working Draft (Draft)" submitted by the Secretariat.

He full tide Secretary General made to the General Assembly, "the Seventh National Power Capacitor Standardization Technical Committee summary" and "2014-2015 annual IEC / TC 33 standard system revision dynamic report, the Seventh Standard Committee in the standard revision work , IEC / TC 33 counterparts in technical work, to complete the tasks entrusted by superiors and the standardization of the award-winning situation were summarized report. Expressed appreciation to all the members and observers of the SCC for their continuous efforts to raise the level of standardization, participate in international standardization activities, and promote the technical progress and prosperity of the power capacitor industry.

The meeting commended the outstanding contributions made by five advanced workers such as Fang Jinlan and six advanced units including Zibo Leibo Power Capacitor Co., Ltd. in the work of the Seventh Standard Committee.

Assembly on GB / T 12747.1-201X "self-healing shunt capacitors for AC power systems up to and including 1000 V nominal voltage - Part 1: Guidance on installation and operation of general performance, test and quota safety requirements", GB / T 12747.2- 201X "Self-healing shunt capacitors for AC power systems up to and including 1000 V nominal voltage - Part 2: Aging test, self healing test and sabotage test", GB / T 6115.2-201X "Series capacitors for power systems Part 2 : Series capacitor bank with a protective device, "a total of three submitting comments on the draft summary of opinion to modify the views adopted and not adopted were fully and seriously discussed, put forward the review comments. The meeting passed the review of three standards and instructed the major drafting units of the standard to make modifications to the standard draft for review according to the review opinions. The draft standard drafts and their attachments should be submitted to the Secretariat of the Standardization Committee by November 30, 2015 as required. After reviewing by the secretariat and reviewing by the secretary-general, the chairman of the committee shall complete the reporting according to the approval and approval procedures stipulated in the "Measures for the Administration of National Standards".

National standard "reactive power compensation device terminology" is responsible for the drafting unit on the first drafting group meeting on the name and scope of the standard, the definition of reactive power compensation three controversial, unable to reach consensus on technical issues Submitted to this meeting for consideration and discussion by all the participants after the formation of the treatment plan submitted to the drafting group completed, the working group will follow the plan follow-up work.

With the care and leadership of higher authorities and affiliated units, the conference successfully completed all the agenda and achieved the expected goals with the joint efforts of leaders of the Standardization Committee and all delegates. (National Power Capacitor Committee Secretariat)

304 Stainless Steel Cut Wire Shot Conditioned

Longlived 304 Stainless Steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 304 stainless steel Cut Wire Shot is the most popular abrasive of them as its excellent performance. The composition of 304 stainless steeel is: C≤0.07, Cr 17.00-19.00, Ni 8.00-10.00, Mn ≤2, P≤0.035, S≤0.030, Si≤1.00. So you can check if 304 Stainless Steel Shot could meet your requirement. Generally 304 stainless tseel cut wire shot could be classfied two kinds. One is as cut and the other is conditioned. Compared with as cut one, conditioned is without sharpe edges and corners and has near round shape. According to this, you can choose the more suitable one.

Sus304 Stainless Steel Cut Wire Shot,Ss304 Stainless Steel Cut Wire Shot,Sus 410 Stainless Steel Cut Wire Shot,Sus 304 Stainless Steel Shot

Longlived Metal Products Co ., Ltd , https://www.stainlesssteelshotcn.com