The refrigerated truck is one of the important transportation tools today and its role is very great. Some of the fresh food we see in shopping malls and supermarkets is transported by it. How much do we know about it for refrigerated trucks ? Let's take a look.

The development stage of refrigerated trucks can be divided into three phases. The first stage was the very beginning, and the refrigerated car was an integral structure that was infused with a foamed metal skin. This process was consistently adopted by all refrigerated truck companies at the time. Of course, products made using this process are also not perfect. Many products have a large number of cold bridges due to the presence of a large amount of metal materials on the car body, and there are defects in the injected foam insulation that are not easy to find. This results in an ineffective quality assurance of the inherent quality, because the foamed material has an insulating effect, but it can also be used as a binder, which can result in a poor adhesion, resulting in a poor insulation effect.

With continued development, the second phase of technology is significantly better than the previous one. The entire second refrigerated vehicle is a structure in which foamed glass steel is injected, and this structure greatly improves the previous problem. This design structure is not only used in this time, it will be used in the future third-generation refrigerated truck manufacturing companies, showing the superiority of this technology. Although this product has progressed a lot on the basis of the first stage product and greatly improved the heat preservation effect, there are still defects that the adhesion is not strong.

The final third stage is the use of a fully-enclosed polyurethane plate bonded to a glass steel structure. This is also the most complete of all designs. At the same time, this technology is used in the production of the next two generations of refrigerated trucks. Low light weight is its advantage, and good heat preservation is its biggest feature. The binder uses unsaturated polyester resin, plus a cushion, and rigid polyurethane foam is used as a heat-insulating material, successfully creating the concept of low thermal conductivity and high strength. Of course, there are many materials that use high-end, they jointly improve the refrigerated truck. The biggest drawback here is the large loss of polyurethane after cutting. Relatively speaking, the material cost is relatively high.

The above is the history of the development of refrigerated trucks . Everyone has already had a deep understanding of it.

 Feed Pellet crusher is the professional double roller crusher equipment use to break (Φ3.0~Φ8.0 mm) big size or diameter feed pellet or grain feed into (Φ1.5~Φ2.5mm) small particles feed, use to feed 1-10days small chick baby. It can also directly crush soybean, corn and soft mineral materials.
In the production of feed pellet, the first step is use feed Pellet Mill produce big diameter and size feed pellet, then use pellet crusher break the pellet into small particles, this production method not only save the electric power and other resources, it also can improve final pellet production capacity, so it is the first choice for many feed manufacturers granulating process.
If not use pellet mill directly produce small size feed pellet, we must change small size/aperture ring die, the feed pellet production capacity will very low, so it will need more power.
   

Feed Crushing Machine

Crushing Equipment,Feed Crushing Machine,Pellet Crumbler,Machine Pellet Crumbler

XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.hxfeedmill.com