Our firm introduced whole set of good-sized numerical control hydraulic
folding equipment(1280/16000) as well as equipped with a series of
good-sized professional equipments of armor plate-flatted machine,
lengthways cut machine, numerical control cut machine, auto-closed up
machine, auto-arc-weld machine, hydraulic redressing straight machine,
etc. The firm produces all sorts of conical, pyramidal, cylindrical
steel poles with production range of dia 50mm-2250mm, thickness
1mm-25mm, once taking shape 16000mm long, and large-scale steel
components. The firm also is equipped with a multicolor-spayed
pipelining. At the meantime, for better service to the clients, our firm
founded a branch com. The Yixing Jinlei Lighting Installation Com,
which offers clients a succession of service from design to manufacture
and fixing.
Our products put into market range in: transmission line steel poles,
substation tubular poles, high mast poles, flag poles, traffic signal
poles, large advertising boards, street lamp poles, telecommunication
poles, wind power poles, courtyard lamps,. The products has been sold to
Southeast Asia, Australia, Middle East and Europe etc. as well as
domestic most provinces and area, has been proved by the English Moody
Co., comply with ISO9001:2000 Quality Control Certifications System
standards. We have got the certificate for 220KV Transmission line steel
poles, 500KV Steel construction and tubular poles, 750KV and below
voltage Steel Tubular Tower and Telecommunication Poles.
Wind Power Pole, Wind Power Steel Pole, Solar Lighting Pole, Power Lighting Pole Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steel-pole.com
What are the general requirements for the layout of the compressor?
(1) The arrangement of the compressor unit and its ancillary equipment shall meet the requirements of the manufacturer; (2) the compressor shall be arranged near the equipment to be pumped, and its ancillary equipment shall be arranged close to the unit; (3) Arrangement of the combustible gas compressor The following requirements shall be met: 1) The distance from open flame equipment and non-explosion-proof electrical equipment shall comply with the current national standards “Code for Design of Explosive and Fire Hazardous Environment Power Equipment†GB50028 and “Design Rules for Fire Protection of Petrochemical Enterprises†GB50160; ) should be arranged in the open air or semi-open. It can be arranged in the factory in cold or windy sand areas; 3) Class A gas compressor plant with single drive power equal to or greater than 150kw, it is not suitable to share a building with other Class A, B and C rooms; above the compressor, Class A, B, and C liquid equipment shall not be arranged, but the high-grade lubricating oil tank for own use is not subject to this limitation.
(4) For single-layer compressors, when the foundation is high, the operating platform should be set as required; when there are more auxiliary equipments, it is better to arrange them in two layers.