Bean
Polishing Machine
Bean Polishing Machine is used to remove
dust or soil from round beans by friction of cloth in the polishing chamber.
Our polishing chamber length is 3meter,
which is the longest design in China.
Its cloth are strong but soft, which can
polish beans very gently and has lower broken rate than using canvas.
We also also install dust collection system
for the bean polishing machine, to collect dust and light impurities to keep
working environment clean.
The Bean Polisher machine can be used for
kidney bean, green mung bean, soybean, black bean etc.
The cloth is soft
but strong.
The Bean Polishing
Machine has half screen. Normally the top half screen is with round hole 2mm. the
bottom half screen may be changed based on diameter of beans, to make sure the
beans will not leak from screens, and small impurities can come out from
screens.
Specification of Bean Polishing Machine
Model
Capacity(t/h)
Power(kw/h)
Dimension(L*W*H
mm)
Weight(kg)
5PJ-3
3
4.37
2000*600*1300
250
5PJ-5
5
5.37
3000*700*1500
450
FAQ:
1. How about payment terms?
Usually is 30%TT
in advance, balance 70%TT before shipment. We also accept L/C at sight, Paypal,
West Union, Money Gram etc.
2. How long is the delivery time?
15 days after
payment
3. How about packaging?
We will pack
machine into plywood box if ship by LCL. If ship by FCL, we will coat machine
with plastic film and fixed well by belt fastener, strong iron wire and steel
wedge etc.
4. Is there any warranty?
Warranty is 1
year.
5. Installation and commission?
We can send
engineer to help installation and commissioning, but you should pay for visa,
air tickets, salary and arrange food and hotel when our engineer in your
country.
6. Do you have some videos that
will help us on assemble or run the machines?
Yes, we have videos on how to assemble and
use our machines, will send you a CD when ship the machine to you.
Bean Polishing Machine,Bean Polisher,Green Bean Polisher,Beans Polishing Cleaning Machine SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com
· Hyundai Motor (China) Investment Co., Ltd. recalled some imported Kia Rui series cars
Recently, Hyundai Motor (China) Investment Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall some imports from October 4, 2017 to August 24, 2017, starting from December 11, 2017. The annual model is from the Aurora series. According to the company's statistics, there are 1,760 vehicles in mainland China.
Some vehicles in this recall range, due to improper adjustment of the parking brake cable clearance, the parking brake pedal can not produce effective braking within three quarters of the full stroke, and does not meet the requirements of the relevant mandatory standards. When parking at a slope or the like, if there is not enough stroke to the parking brake pedal, the vehicle may accidentally slip and there is a safety hazard.
Hyundai Motor (China) Investment Co., Ltd. will adjust the parking brake cable clearance for vehicles within the recall to eliminate defects. Stock vehicles will be sold after the defect has been eliminated.
When parking the vehicle and operating the parking brake, the relevant user should step on the parking brake pedal to the end and place the shift lever in the “P†position. The user should contact the dealer for repair as soon as possible after the recall operation begins.
Hyundai Motor (China) Investment Co., Ltd. will notify customers by registered mail. Users can call the Hyundai Motor (China) Investment Co., Ltd. hotline 400-882-2060 to obtain information about the recall through fixed line or mobile phone. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.
Â