Tv Backplane Mould Chart,Tv Backplane Mould Kit,Tv Backplane Mould Steel,Server Chassis Mould Method Kunshan Wangdaxin Precision Mould Co., Ltd. , https://www.wdxmould.com
2. Before the equipment is operated, the inspection shall be carried out according to the inspection card regulations to find out whether the electrical control is normal, whether the switches and handles are in the prescribed positions, whether the lubrication road is unimpeded, the oil quality is good, and the lubrication is added as required. Oil.
3, when the boot should be empty run 3 to 5 minutes, check whether the various departments are operating normally.
4. When starting up, pay attention to the adjustment of the hydraulic system. The working pressure of the total system must be within the rated pressure range.
5, before processing, must first manually operate each axis of motion, until the hydraulic system can reach normal fast operation can be processed.
6. Before processing the parts, you must strictly check the origin of the machine tool and whether the tool data is normal.
7. The operator must not leave the machine tool without authorization in order to prevent the workpiece from being scrapped or the machine tool accident caused by the misoperation of the computer.
8. When abnormal phenomena or faults occur during the work, the machine should be shut down immediately or notified to the maintenance personnel for overhaul.
9. After the work is completed, the machine tool should be cleaned. The switches and handles should be placed in a non-working position to cut off the power supply.
10. Always keep the machine clean and in good condition. Keep accessories properly and do not lose or rust.
CNC Machine Safety Operation Regulations
1. The operator must be familiar with the general performance, mechanism, transmission principle, and control program of the machine tool. It is forbidden to use ultra performance.