Detroit Electric will showcase its final version of the SP: a battery-powered electric sports car. The car will resemble a Tesla sports car that is no longer produced. Both are pure battery powered two-seater cars. The founder of Detroit Electric Company was former Lotus executive Lin Zhi. Detroit Electric stated that its car will not be a convertible, but will have better aerodynamic performance, a longer distance, and a faster speed. The company claims that the limited edition SP is light weight and will be the world's fastest mass-produced electric sports car with a top speed of 155 mph. The production of the car will begin at the end of this year and will be sold in Asia. Europe and North America will start selling at the beginning of next year. There are no published prices.
Internal rubber mixer mainly used for rubber molding and mixing of rubber, is a machine equipped with a pair of specific shapes and relative to the rotation of the rotor, adjustable temperature and pressure in the sealed state of the polymer material on the plastic and mixing of the mechanical, mainly composed of the mixing chamber, rotor, rotor seal device, feeding pressure material device, discharge device, transmission and chassis and other components.
This machine is suitable for EVA, rubber,synthetic rubber,hot melt and all kinds of chemistry raw material
to mix ,mediate and disperse, and then put into the mass production.
75L kneader mixer
Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life. The mixing shaft is made of nickel & chrome alloy steel. The high abrasion part is additional welded with imported anti abrasion welding rod, then electroplating with hard chrome which is more durable.The main mixing chamber is whole set casting by high anti abrasion alloy steel, after special dealing then electroplating with hard chrome.The anti leakage unit of side wall is made of high-tech material which is wear-resisting and easy to maintain. [M" shape of the pressure gland which make the mixing more thorough and even. The main motor ampere meter is installed in the electrical control panel, under normal running, when the pressure of the mixing chamber is too big, the current exceeds the set value, the connector will automatically adjust the gland`s up and down via the magnetic valve to remit the pressure of the mixing chamber. The mixing chamber is bigger, the diameter of the air cylinder is bigger and gear reducer is also bigger, which enhance the mixing effect,save mixing time and also save the cost.
Main parameter
Mixing capacity(L)
75L
Motor power
110KW 6P AC
Material feeding
Front/back
Temperature adjustment
Steam heating or water cooling
Mixing capacity per batching
About 70-80kgs/time
Mixing time
4-8mins/batching
Rotor RPM
RPM
Temperature difference
±5º
gear reducer
ZLY375
Gear width
Input 110mm, output 140mm
Tilting angle
140°
Main air cylinder size (mm)
360×900
Piston rod diameter (mm)
120
Mixing chamber size (mm)
610×600×725
Two rotors center to center space (mm)
355
Rotor bearing diameter (mm)
140
Machine size(mm)
3900x2900x3400
Machine weight(kg)
9500
Internal Mixer,Turnover Internal Mixer,Internal Rubber Mixer,Pressure-Type Internal Mixer SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.chinaweldingmachine.cn
Detroit Electric Company was founded in 2008 and it will build up to 2,500 sports cars in Michigan in March 2013, but it does not say exactly where. Now that the company plans to start at the end of this year, all cars will be built in a new British factory dedicated to Detroit Electric. The company also plans to recruit a new team at the European headquarters in the Netherlands to manage brand sales and marketing in the region, as well as customer service.
Detroit to produce electric sports car at the end of the year